GolfGTIforum.co.uk

Model specific boards => Golf mk2 => Topic started by: Matt Gator on 30 August 2010, 20:03

Title: Rev counter help
Post by: Matt Gator on 30 August 2010, 20:03

Hi my rev counter's not working anyone got any ideas??
Cheers matt  :laugh:

Title: Re: Rev counter help
Post by: weazgti on 30 August 2010, 20:22

Plenty on this one,do a search  :wink:
Does your mfa work?

Title: Re: Rev counter help
Post by: Matt Gator on 30 August 2010, 20:25

no it doesn't work mate

Title: Re: Rev counter help
Post by: X4MGS on 30 August 2010, 21:23

Need a new set of Clocks M8...

They are Fubbarred...

Check wether yours are 2 Plug Or One Before you rush out and buy a new one...

If your hazard is on the Dash its 2 plug, If its on the Steering Colum its 1 plug...

HTH

Title: Re: Rev counter help
Post by: Matt Gator on 30 August 2010, 21:26

Quote from: X4MGS on 30 August 2010, 21:23

Need a new set of Clocks M8...

They are Fubbarred...

Check wether yours are 2 Plug Or One Before you rush out and buy a new one...

If your hazard is on the Dash its 2 plug, If its on the Steering Colum its 1 plug...

HTH

Cool cheers for that mate i'll get on the case  :smiley:

Title: Re: Rev counter help
Post by: weazgti on 30 August 2010, 22:16

noticed quite a few sets on ebay last week

Title: Re: Rev counter help
Post by: Ben Lessani on 30 August 2010, 22:22

Quote from: weazgti on 30 August 2010, 20:22

Plenty on this one,do a search  :wink:
Does your mfa work?

Wasn't aware they were linked? My MFA died years ago and my rev counter works fine ...

Check the ground from coil > head.

Title: Re: Rev counter help
Post by: X4MGS on 31 August 2010, 00:04

Yep.... All to do with the thin plastic circuit board at the back of the clocks...

Rev counter don't work then the MFA don't work...

In most inst...

Quote from: Ben Lessani on 30 August 2010, 22:22

Quote from: weazgti on 30 August 2010, 20:22

Plenty on this one,do a search  :wink:
Does your mfa work?

Wasn't aware they were linked? My MFA died years ago and my rev counter works fine ...

Check the ground from coil > head.