GolfGTIforum.co.uk

Model specific boards => Golf mk6 => Topic started by: golfgti5 on 30 August 2010, 16:05

Title: RNS510 C LED camera/emblem problem
Post by: golfgti5 on 30 August 2010, 16:05

Hello,

i swapped mine RNS510 A-version, wich was working perfect with my camera/emblem, for the new RNS510 C LED version, but now my camera/emblem not come's visual.........

anybody who can help me??  (cameluck??)
i didn't change anything with my vag.com cable....


greetings Ron

Title: Re: RNS510 C LED camera/emblem problem
Post by: Snoopy on 30 August 2010, 16:10

The new one maybe set different, check your vag.com settings

http://www.golfgtiforum.co.uk/index.php?topic=152441.0

Title: Re: RNS510 C LED camera/emblem problem
Post by: p3asa on 30 August 2010, 16:57

Your car will be set up for the rear camera but as far as I know you will still need to set up your RNS510 to utilize the rear camera via VAG.COM as Snoopy has suggested.

Title: Re: RNS510 C LED camera/emblem problem
Post by: golfgti5 on 30 August 2010, 17:01

Quote from: p3asa on 30 August 2010, 16:57

Your car will be set up for the rear camera but as far as I know you will still need to set up your RNS510 to utilize the rear camera via VAG.COM as Snoopy has suggested.

So bassicly every time you install an new RNS510 or other RNS510 you will have to do coding again???

Title: Re: RNS510 C LED camera/emblem problem
Post by: p3asa on 30 August 2010, 17:40

You would only do the coding if the new head unit hadn't already been set up for the camera as far as I am aware.

With yours being new (according to your other thread) it has to be coded to accept the camera. At least that is the way I read it.

Title: Re: RNS510 C LED camera/emblem problem
Post by: golfgti5 on 30 August 2010, 18:45

I did the coding, but the reset did it, thanks guys!!!