GolfGTIforum.co.uk

Model specific boards => Golf mk2 => Topic started by: twistedblack69 on 16 August 2010, 15:35

Title: 8v>16v Master Cylinder...
Post by: twistedblack69 on 16 August 2010, 15:35

I went to change the MC on my 8v to the 16v unit and noticed it's got 4 pipe outlets, as opposed to two on my current one. What are these extra two outlets for?

Title: Re: 8v>16v Master Cylinder...
Post by: Simeon on 16 August 2010, 16:20

Can block off the two extra or run single pipes to each brake if you fancy it

Title: Re: 8v>16v Master Cylinder...
Post by: boxer1968 on 16 August 2010, 21:21

hello didnt want to start a new topic as i have same question what have you blanked off spare outlets with? maybe a daft question but i have the same problem with a new 22mm m/c

Title: Re: 8v>16v Master Cylinder...
Post by: boxer1968 on 16 August 2010, 22:34

found out what i needed by searching :grin:

Title: Re: 8v>16v Master Cylinder...
Post by: twistedblack69 on 16 August 2010, 23:34

So the 16v had 2 more brakelines than the 8v?

Title: Re: 8v>16v Master Cylinder...
Post by: rubjonny on 17 August 2010, 10:12

no it didnt, still uses 2 lines. just the factory fit mcs have 2 outlets in use, new ones tend to have 4. as for blockign them off, can use bleed nipples :)