GolfGTIforum.co.uk

Model specific boards => Golf mk3 => Topic started by: Dan_GTi8v on 27 July 2010, 15:57

Title: 1.8t parts, ibiza clutch etc
Post by: Dan_GTi8v on 27 July 2010, 15:57
OK, first off sorry for all the 1.8t posts recently lol, just wanna clear everything up before I start :)

So I'm starting to get bits and pieces together now, so far I have
Downpipe
1.8t Cat
Map sensor
agu ECU on the way shortly mapped and immob defeated
VR6 clutch

Next on my list is the Ibiza clutch setup. Without having the engine or gearbox to look at its a bit confusing working out what I need, so my next question is, what exactly do I need from the Ibiza clutch setup? :)
Cheers!
Title: Re: 1.8t parts, ibiza clutch etc
Post by: rubjonny on 27 July 2010, 16:04
I assume you mean SEAT cable clutch conversion parts, if so:
http://www.clubgti.com/forum/showthread.php?t=107068

you need a flywheel from MK3/SEAT ABF or any Corrado, Golf G60 or most Passat B3/4 models. some of the base spec passats have a smaller clutch, so just make sure its the 228mm one
Title: Re: 1.8t parts, ibiza clutch etc
Post by: Dan_GTi8v on 27 July 2010, 16:15
Yeah I think thats it cheers :)
Title: Re: 1.8t parts, ibiza clutch etc
Post by: LazyLunatic on 27 July 2010, 16:43
on my fone, so not clicked the link, but just to add i got it all fron vw and run a mk2 1300 cable which i got from vw too.

Looking forward to your build thread bud. Ur doing it different to me, so im quite intrigued!
Title: Re: 1.8t parts, ibiza clutch etc
Post by: Dan_GTi8v on 27 July 2010, 17:47
does the mk2 cable fit without modding? been reading up and some people saty its too short or needs the plastic bits removing to free up more of the cable etc
Title: Re: 1.8t parts, ibiza clutch etc
Post by: LazyLunatic on 27 July 2010, 18:40
Quote from: Dan_GTi8v on 27 July 2010, 17:47
does the mk2 cable fit without modding? been reading up and some people saty its too short or needs the plastic bits removing to free up more of the cable etc

mine fit fine. you will need to drill a hole into the scuttle tray area as it doesnt take the same path :)
Title: Re: 1.8t parts, ibiza clutch etc
Post by: Dan_GTi8v on 27 July 2010, 22:05
is this the right cable?
http://www.eurocarparts.com/ecp/c/Volkswagen_Golf_1.3_1992/p/Car-Parts/Transmission/Clutch-and-Associated-Parts/Clutch-Cables/?646440231&1&7bfdf398773a12eb226be4043248a08c1c3dd030&CABC
Title: Re: 1.8t parts, ibiza clutch etc
Post by: LazyLunatic on 28 July 2010, 07:49
Quote from: Dan_GTi8v on 27 July 2010, 22:05
is this the right cable?
http://www.eurocarparts.com/ecp/c/Volkswagen_Golf_1.3_1992/p/Car-Parts/Transmission/Clutch-and-Associated-Parts/Clutch-Cables/?646440231&1&7bfdf398773a12eb226be4043248a08c1c3dd030&CABC

looks to be the one. about £20 from the dealership i think.
Title: Re: 1.8t parts, ibiza clutch etc
Post by: Dan_GTi8v on 28 July 2010, 18:01
will the standard 8v gti fuel regulator be good enough for the job of running a mapped 1.8t with a k03s? if not I can get a 4 bar for £20
Title: Re: 1.8t parts, ibiza clutch etc
Post by: LazyLunatic on 29 July 2010, 12:06
Quote from: Dan_GTi8v on 28 July 2010, 18:01
will the standard 8v gti fuel regulator be good enough for the job of running a mapped 1.8t with a k03s? if not I can get a 4 bar for £20

the 1.8t has a 3bar fuel pressure regulator on the fuel rail. the engine should come with this tbh. dont want 4bar fpr for the k03s.