GolfGTIforum.co.uk

Model specific boards => Golf mk3 => Topic started by: palmer on 26 July 2010, 23:20

Title: engine swap !!
Post by: palmer on 26 July 2010, 23:20

 I bought this  1993  mk 3   GTi with 110000 miles on it --- MOT fail due to someone missing the jacking points at front

now  after fitting new cam belt  the engine  has " lost compression "  the garage tell me  ( have asked for more info )

if the worst come to the worst  I will swop engine  it is  2E  version

any one had any experience of changing an engine  and how big a job it is ?

what engines  would it  take / could I  upgrade  at the same time  --- clutch up grade  ? 

any info most appreciated

cheers

rob

Title: Re: engine swap !!
Post by: Wayne on 26 July 2010, 23:26

Fit the same to be honest.

2e is different to the later AGG lump.

Title: Re: engine swap !!
Post by: palmer on 26 July 2010, 23:58

thought that might be the  way to be honest 

is it a big job ?

and should I do the clutch at the same time when engine is out ?

thanks

rob

Title: Re: engine swap !!
Post by: rubjonny on 27 July 2010, 09:32

since its a 2e, any of the 2.0 8v lumps can be fitted.  the difference is the later ones have a crank sensor, which isnt used on the 2E. just dont plug it in! apart from that base block and heads are identical.  Just need to swap your old 2E dizzy into the later block, and various bits like inlet etc.

not really a hard job, unbolt engine drag out with crane, swap over whats different and chuck it back the same way.  clutch deffo should be done while engine is out, madness not to. get a good quality sachs clutch kit.

however I'd be suspicious that the problem happened right after the timing belt, I wonder if the timing is messed up. dizzy is easy to move when belt is off so might be that