GolfGTIforum.co.uk

Model specific boards => Golf mk2 => Topic started by: jezza16v on 24 July 2010, 09:24

Title: Steering UJ rubber shroud - ?
Post by: jezza16v on 24 July 2010, 09:24
Hi all. I need a new rubber shroud for the steering UJ as the old one has perished and fallen apart. The local dealer can get one but quoted £33.23,.  :shocked: (and they won't give out the part number?)? Looked on GSF but nothing listed.
Anyone know an alternative source? Thanks. (BTW, 8v without PAS)
Title: Re: Steering UJ rubber shroud - ?
Post by: Diamond Hell on 24 July 2010, 09:43
IIRC this is genuine only, but it might be worth checking at a couple of specialists.
Title: Re: Steering UJ rubber shroud - ?
Post by: Simeon on 24 July 2010, 10:06
Thought the non pas ones were obsolete? .. if they are and the dealer says he can get one for circa 30quid then buy as many as he can get hold of  :laugh:
Title: Re: Steering UJ rubber shroud - ?
Post by: rubjonny on 26 July 2010, 09:25
SEAT Toledo up to 96 use MK2 UJ boots, just need to find one without PAS. this might be tricky though :(
Title: Re: Steering UJ rubber shroud - ?
Post by: mk2bal on 26 July 2010, 17:56
is it really needed? i cut mine off when i did eng conv, had an immaculate 1 on it as well. it was too in the way when i tried joining the column to rack,so it went in the bin in bits, then i realised i had to swap my column over cos it didnt fit the pas 1!! i probably wouldve been able to leave it on if i had the right parts in the 1st place...
Title: Re: Steering UJ rubber shroud - ?
Post by: leeroy20vt on 26 July 2010, 19:52
is it really needed? i cut mine off when i did eng conv, had an immaculate 1 on it as well. it was too in the way when i tried joining the column to rack,so it went in the bin in bits, then i realised i had to swap my column over cos it didnt fit the pas 1!! i probably wouldve been able to leave it on if i had the right parts in the 1st place...

pretty sure could be mot failure but dont quote me on that
Title: Re: Steering UJ rubber shroud - ?
Post by: Wayne on 26 July 2010, 23:23
is it really needed? i cut mine off when i did eng conv, had an immaculate 1 on it as well. it was too in the way when i tried joining the column to rack,so it went in the bin in bits, then i realised i had to swap my column over cos it didnt fit the pas 1!! i probably wouldve been able to leave it on if i had the right parts in the 1st place...

Yes, as without it the grease dries out then the uj's fail.
Title: Re: Steering UJ rubber shroud - ?
Post by: jamrock on 27 July 2010, 23:38
http://cgi.ebay.co.uk/VW-GOLF-MK2-GTI-RUBBER-UJ-STEERING-BOOT-COVER-/390222043561?cmd=ViewItem&pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item5adb0bd9a9
Title: Re: Steering UJ rubber shroud - ?
Post by: rubjonny on 28 July 2010, 09:43
that looks liek a PAS one to me