GolfGTIforum.co.uk

Model specific boards => Golf mk2 => Topic started by: warnesey333 on 13 July 2010, 22:30

Title: Oil Pressure/Temperature on filter and side of head
Post by: warnesey333 on 13 July 2010, 22:30

Well I'm finally coming close to completing the rebuild of my mk2, but I just want to make sure that I have everything.

In total, there are 3 holes for oil switches to go in.

From what I understand, the side of the head is the blue(?) and uses a higher (1.5 - 1.8 i think) bar

Whereas the one on top of the filter housing uses a lower pressure?

If I were to replace all oil temp senders and pressure switches through GSF, what parts would I need through their website?

There seems to be an awful lot of pressure switches and I am confused as to which to get...


Cheers for the help
Jack

Title: Re: Oil Pressure/Temperature on filter and side of head
Post by: rubjonny on 14 July 2010, 09:08

if its an 8v:
large blue or brown, 0.3 bar pressure warning switch -> side of head
large white, 1.8 bar pressure warning switch -> filter housing
small white, oil temperature -> filter housing

if its a 16v:
large blue or brown, 0.3 bar pressure warning switch -> filter housing
large white, 1.8 bar pressure warning switch -> filter housing
small white, oil temperature -> back of head
small black, coolant temp -> side of head x3

Title: Re: Oil Pressure/Temperature on filter and side of head
Post by: warnesey333 on 14 July 2010, 12:27

Legend, thanks very much.

Title: Re: Oil Pressure/Temperature on filter and side of head
Post by: Horney on 14 July 2010, 12:30

And don't buy GSF ones, they leak. Get gen VAG ones from a dealer or TPS.

Nick

Title: Re: Oil Pressure/Temperature on filter and side of head
Post by: jamrock on 14 July 2010, 13:48

£30 each when i went to check last week.

nearly a ton for three sensors!!!  :angry:

how about ECP??