GolfGTIforum.co.uk

Model specific boards => Golf mk2 => Topic started by: cawsey20 on 08 July 2010, 13:47

Title: Nitrous into mk2.
Post by: cawsey20 on 08 July 2010, 13:47

Hi there,
Basically instead of selling my track toy i may keep it for that reason !.

Im planning a trip up to santa pod next weekend and have been offered a nitrous kit.
I may just slam it on for a bit of fun.

How easy are they to fit to a mk2 and also where is the best place to attach the nozzles. ?.

Its a 16v by the way    , cheers in advance

Title: Re: Nitrous into mk2.
Post by: Sam on 08 July 2010, 13:58

i would just (not knowing anything at all) drill an install a one way valve in the air intake manifold after the throttle body

Title: Re: Nitrous into mk2.
Post by: cawsey20 on 08 July 2010, 14:01

Sounds like my kind of quick install :D.

Title: Re: Nitrous into mk2.
Post by: cawsey20 on 08 July 2010, 14:02

BTW if anyone has pictures even better

Title: Re: Nitrous into mk2.
Post by: cawsey20 on 08 July 2010, 16:33

Anyone else ?.

Title: Re: Nitrous into mk2.
Post by: Sam on 08 July 2010, 16:36

i think that this method will work, see no reason why it wouldnt. Nitro + Air + Fuel = faster!

Title: Re: Nitrous into mk2.
Post by: Horney on 08 July 2010, 16:40

Try ClubGTI. A couple of peeps on there run giggle gas.

Nick

Title: Re: Nitrous into mk2.
Post by: Sam on 08 July 2010, 16:53

read through these, should give you a few ideas

http://www.noswizard.com/installation-manuals.php

Title: Re: Nitrous into mk2.
Post by: Wayne on 08 July 2010, 21:09

Get it installed by someone that knows what they are doing.

Title: Re: Nitrous into mk2.
Post by: bodga on 08 July 2010, 22:03

A mate of mine does the 1/4 mile at pod with nos on his bike, so i emailed him and he sent me this stuff to help you:


The foggers go intake side of the carb/injection rail
 
A brand new gas kit with a direct port injection to fit a fuel injection Golf
http://www.noswizard.com/product_desc.php?id=58
 
Some fitting instructions
http://www.solware.co.uk/nitrous-oxide-kits/nitrous-oxide-and-components-fitting-instructions.shtml
 
A really cool gas site which gives you ALL the info on building your own gas kit using everyday stuff - i.e. fridge stuff
http://www.nitrous.info/car-nitrous-system.htm
 
This is a plate that the big yank motors use to insert between carb and intake incorporating the foggers
http://cgi.ebay.com/ebaymotors/HOLLEY-4150-NITROUS-KIT-SYSTEM-DUAL-SPRAY-BAR-PLATE-_W0QQcmdZViewItemQQhashZitem58888b3fa5QQitemZ380247949221QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
 
http://www.nitrous.info/

His bike is in bits at the mo, he  blew an oil seal at pod a few months ago  :sad:(from memory i think he was doing approx 9sec runs)

Title: Re: Nitrous into mk2.
Post by: cawsey20 on 09 July 2010, 09:08

Cheers for the info guys,
As for getting it fitted as it is my toy rather than my daily drive im up for installing it myself. If it goes wrong in goes a 20vt happy days.

Title: Re: Nitrous into mk2.
Post by: nealey on 09 July 2010, 21:51

Lad i know fitted it himself to his mk2 16v, thread covering his install is here

http://www.technical-forum.com/nitrous-advice-forum/help-on-direct-port-locations-t3478,highlight,fogger+position.html

Title: Re: Nitrous into mk2.
Post by: Agreeable Slick on 09 July 2010, 22:05

do it, slap that charger you were on about on it.

I'm just curious to see how long the engine lasts.