GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: Mikemk4 on 01 July 2010, 18:07

Title: SMIC piping
Post by: Mikemk4 on 01 July 2010, 18:07

Im putting the SMIC back on my 1.8T and ive got the following piping  plus the one from throttle body to intercooler. .

(http://i682.photobucket.com/albums/vv183/Mikeyg4267/IMG_0046.jpg)

Is this all i need? Or are there any more?

Thanks

Title: Re: SMIC piping
Post by: vwfiend on 01 July 2010, 18:24

There should be a cheeky sleeve that goes on the outgoing side of the pancake pipe iirc

Title: Re: SMIC piping
Post by: Mikemk4 on 01 July 2010, 19:07

Dont suppose you have a diagram or a rough drawing how it goes do you mate? . . i have bits of odd pipe laying about but i cut the originals and gave some away when doing my FMIC.

Title: Re: SMIC piping
Post by: vwfiend on 01 July 2010, 19:40

I don't have a diagram mate and the bits I took off mine are at a friends. Sorry pal. I just remember that sleeve on the pancake behind the drivers wheel. When I did my front mount everything back from the pancake was kept original, I only had to take out the side mount which was twinned with the pancake pipe via the sleeve then the pipe going to the throttle body from the side mount I think......

Title: Re: SMIC piping
Post by: Mikemk4 on 01 July 2010, 19:57

Ok mate thanks for your help  :smiley:

Title: Re: SMIC piping
Post by: Hulmie on 02 July 2010, 08:51

Looks like your missing 1 hose that goes from pancake pipe to IC. Its only a short joiner hose

Title: Re: SMIC piping
Post by: Mikemk4 on 02 July 2010, 10:07

Ok thanks mate, i have a few bits of pipe laying about in garage, do you think that would do it? or is it a special chape or anything, also the metal bit on the end of the pipe in my picture, what does that attach to? thanks

Title: Re: SMIC piping
Post by: Hulmie on 02 July 2010, 10:11

that'll bolt up somewhere to hold it in place, think underside of the wing. You will get more of an idea when its all in place and you will see a hole.

Pipe is nothing special, just a straight joiner pipe only about 2 inch's long.

Title: Re: SMIC piping
Post by: Mikemk4 on 02 July 2010, 10:43

Ok mate cheers  :smiley:

Title: Re: SMIC piping
Post by: northeast_gti-t on 03 July 2010, 00:33

if you want to pm me your address etc i can let you have that hose you require as i won't be needing it also the two jubilee clips the clips and the hose are near enough new been on the car about 7-8 weeks  :wink: