GolfGTIforum.co.uk

General => The garage => Topic started by: jamrock on 20 June 2010, 19:56

Title: toad Ai606 boot pop
Post by: jamrock on 20 June 2010, 19:56

i have wired up my alarm to try and work a boot popper. I have used this diagram

http://www.fiestaguides.co.uk/images/boot_pop/big/01.jpg

then i trigger the boot pop the car locks. any idea what i can do to stop it from locking the car??

i am not using a switch at present, trying to pop it off the alarm

thanks

Title: Re: toad Ai606 boot pop
Post by: Rmachines on 23 June 2010, 22:19

Could do with a bit more info here...

What car?   and what Alarm system etc..?

Title: Re: toad Ai606 boot pop
Post by: jamrock on 24 June 2010, 01:46

yeah might help :laugh:

on my mk2 golf

alarm is a toad Ai606

the car shouldnt lock when i trigger it. but when i do the car locks and to unlock it i have to arm it and then disarm it  :shocked:

Title: Re: toad Ai606 boot pop
Post by: Rmachines on 24 June 2010, 07:34

Ok, did you wire the whole alarm in your self or are you just adding the boot popper? 

Title: Re: toad Ai606 boot pop
Post by: jamrock on 24 June 2010, 11:21

did the whole alarm myself. there is a wire that when i hold down a button for 3 secs it turns positive. thats the wire i have been trying to connect my pop and relay to.

Title: Re: toad Ai606 boot pop
Post by: sharki786 on 24 June 2010, 12:53

hhiya jamrock, i think the button your pressing is the total closure, is it the bottom right button? as that is the total closure (closes everything, the doors windows & sunroof if they elec. two things you could try, reprogram the alarm or try the bottom left button & keep it pressed see what happens with that. i have same alarm but no boot pop

Title: Re: toad Ai606 boot pop
Post by: jamrock on 24 June 2010, 12:56

cool will do. yeah i think thats the button.