GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: Purely VAG on 19 June 2010, 22:15

Title: ELSA anyone? need torque settings
Post by: Purely VAG on 19 June 2010, 22:15

Hey lads, i havnt got Elsa and require torque settings for following:

* Big end bearing
* Main bearings
* Crank bolt

If anyone can help, much appreciated.

Jrd,

Title: Re: ELSA anyone? need torque settings
Post by: northeast_gti-t on 19 June 2010, 23:39

Quote from: JordyGTI on 19 June 2010, 22:15

Hey lads, i havnt got Elsa and require torque settings for following:

* Big end bearing
* Main bearings
* Crank bolt

If anyone can help, much appreciated.

Jrd,

Here you go  :wink:
Big end bearing cap nuts/bolts : stage 1 : 30 nm 22 lb/ft *
                                            stage 2 : angle tighten 90 degrees

Main bearing cap bolts :            stage 1 : 65nm 48 lb/ft *
                                            stage 2 : angle tighten 90 degrees

Crank pulley bolt :                                           25 nm 18 lb/ft

* Requires NEW bolts/nuts.

Title: Re: ELSA anyone? need torque settings
Post by: Purely VAG on 20 June 2010, 01:06

LEGEND !

Ahhh i owe ya, chuffed, whilst my mrs is out fkin sumone else tonight ive got an engine in the kitchen, bah im leaving in the morning, might do it on the carpet eh !

Anyone got any single blondes on there hotline, PM me numbers, I offer good playtime, ugg boots and regular shopping trips but i have big oily hands !  :grin:

Title: Re: ELSA anyone? need torque settings
Post by: Wazzzer on 20 June 2010, 09:51

Quote from: JordyGTI on 20 June 2010, 01:06

whilst my mrs is out fkin sumone else tonight

You serious? :shocked:

Title: Re: ELSA anyone? need torque settings
Post by: old_n07 on 20 June 2010, 18:04

LOL.  leave the muck on the carpet :afro:

Title: Re: ELSA anyone? need torque settings
Post by: northeast_gti-t on 20 June 2010, 20:52

no probs fella  :wink:
oh and maybe drain off the old oil on the living room carpet  :grin: and make her clean it up :afro: