GolfGTIforum.co.uk

Model specific boards => Golf mk1 => Topic started by: benji mk2 on 13 December 2004, 09:05

Title: 16v Master and servo
Post by: benji mk2 on 13 December 2004, 09:05

 Managed to get hold of 16v servo and master cylinder the other day. I was told it's just a straight swap for the standard Mk1 item. The servo fits no probs but the brake lines to the master are completely differant. Any ideas anyone???    Cheers, Ben

Title: Re: 16v Master and servo
Post by: mk1 on 13 December 2004, 19:39

I had to remake the short brake pipe that goes to the front port o/s (down to a "t" piece) opposite where the brake light switch screws in. The m/cylinder I have has four ports on it (the original one had five ports) , so I had to loose one switch, the two rear pipes go in without much trouble.
Steve.

Title: Re: 16v Master and servo
Post by: benji mk2 on 14 December 2004, 09:17

Cheers steve, I have another look!

Title: Re: 16v Master and servo
Post by: hairyarse on 20 December 2004, 21:56

Ben, for your info!

http://portal.campaignregister.co.uk/modules.php?name=Forums&file=viewtopic&t=465