GolfGTIforum.co.uk
Model specific boards => Golf mk3 => Topic started by: VR6_Wherry on 21 April 2010, 14:50
-
Right guys bit of an issue here!
I'm trying to install my alarm when i must have connected some wrong wires...i heard a little pop and sure enough i blew a fuse. Looked through the fusebox an found it was number 20. This did the inside electrics, replaced and now is all good.
BUT now with the buttons i can only get the windows to go down and not up! if i leave the key in the door they go up and down...so i know it's not the regulators have i blown a relay?
Help please!!! :sad:
-
sounds like a earth problem
-
I'm bumping this back up as i still haven't fixed this issue after a year and 7 months! been real lazy!! :grin: :grin:
-
I take it both door switches don't go up? must be a relay
-
I take it both door switches don't go up? must be a relay
Nope, they only go down. If i press up it stops them going down (normal)
I thought relay but can't find anything about them?
-
to be honest i aint got a clue :lipsrsealed: :laugh:
-
Sounds like you melted a wire somewhere to be honest. :huh:
-
:sad:
I'm looking around and can't find a fcuking thing! :grin:
Looks like soldering iron will be out tomorrow and i will be pulling everything out! :grin:
I guess when i press the button to just see which one is clicking? Or is that the motor that clicks?
-
No relays all done internal to the motor electrics.
You cut through a wire somewhere?
Taken the connections off and back on?
-
Had this problem in mine about three weeks ago.. turned out to be the pins in the drivers door switch were loose in the multiplug and not making a good enough connection to the switch. Try and get yourself some form of power probe and attempt to operate the windows using that. Failing that a short piece of wire to complete the circuits should sufice.