GolfGTIforum.co.uk
Model specific boards => Golf mk3 => Topic started by: javalin on 11 April 2010, 17:32
-
Hi
Where do you get them from? I think VW only sell the loom for £500....?
Anybody breaking a mk3??? After injector loom, possibly a broken wire in one of mine - when I wiggle it it works ok.
James
-
I'm interested in this too. I get a Throttle sensor fault in Vag Com which causes cutting out. However, sometimes a wiggle of the loom by the injectors sorts it out, albeit temporarily.
So I am wondering if the problem is actually the loom, and not the throttle sensor.
J
-
i thought vw sold them? just the ends with a little bit of cable ready to crimp/solder onto the loom.
-
oh ok - i'll go ask.
ta
-
vw sell the bare plugs, the pins on their own and pins with a length of wire crimped on. if you want the most common type of pin/plug, you can get them from vehicle wiring products. they're 'junior timer' type connectors, just make a note of how many locking tabs each plug has. I bought a load of 2 pin plugs to make MK2 relayed lighting looms, then found the vag spotlight plugs have 2 lock tabs, and the plugs I bought all had 1!
-
rubjonny is with out doubt the MK 3 wiring legend :cool:
-
top info from rubjonny
James
-
http://www.vehicle-wiring-products.eu/VWP-onlinestore/connectors/housings.php
I bought:
192147 2 pole female housing £1.20
192175 Female terminal £0.52
The housing will fit most 2 pin connections, except the spot light plugs and a few other lighting connectors. you'll see what I mean from pics, the one on VWP has the 1 locking tab on the top, but my spotlight plugs had 2!
The pins fit a wide range of VAG housings, I've used them all over. will fit the fusebox plugs and various others. Shame they only do the 1 size, so cant be used for chunkier wires.