GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: mowlamb on 27 March 2010, 07:26
-
I got these for free and I can't find any information about them online anywhere.
(http://i779.photobucket.com/albums/yy80/mowlamb/P3100108.jpg)
Does anyone know what they are? As you can see they are made by Stilauto. Has anyone heard of them or know anything else about them?
-
took ages to find the model number!
http://www.ameck.eu/felgen.htm
were a well respected brand in the mid 90's, i always wanted a set of stilauto sigma's - kind of like azev a's but were much more rare at the time.
:)
-
Says on my one's 7.5Jx16. Do you know if these will fit my mk4? I tried trial fitting one of them yesterday but couldn't get my wheel off the hub! So looks like I'm gunna have to find another way of getting it off.
-
Found this (http://translate.google.co.uk/translate?hl=en&sl=ru&u=http://www.pilotyres.ru/prod/207/pro-28/brand-stilauto/model-sr-200.html&ei=u8itS-jMC5ey0gTuyayWDg&sa=X&oi=translate&ct=result&resnum=10&ved=0CCQQ7gEwCQ&prev=/search%3Fq%3Dstilauto%2Bsr%2B200%26hl%3Den%26rlz%3D1T4ACAW_en___GB365)
And this (http://translate.google.co.uk/translate?hl=en&sl=ru&u=http://etete.ru/stilauto/&ei=tsmtS4LhGI_40wTm5YCHDg&sa=X&oi=translate&ct=result&resnum=10&ved=0CDIQ7gEwCTgK&prev=/search%3Fq%3Dstilauto%2Bsr%2B200%26start%3D10%26hl%3Den%26sa%3DN%26rlz%3D1T4ACAW_en___GB365)
Looking at that it seems they are possibly 5x120. Anyone know what car they are for?
-
Found this (http://translate.google.co.uk/translate?hl=en&sl=ru&u=http://www.pilotyres.ru/prod/207/pro-28/brand-stilauto/model-sr-200.html&ei=u8itS-jMC5ey0gTuyayWDg&sa=X&oi=translate&ct=result&resnum=10&ved=0CCQQ7gEwCQ&prev=/search%3Fq%3Dstilauto%2Bsr%2B200%26hl%3Den%26rlz%3D1T4ACAW_en___GB365)
Looking at that it seems they are possibly 5x120. Anyone know what car they are for?
5x120 is BMW
-
Cheers Wayne and jv. Not looking good for fitting them on the tdi then :laugh:
Hopefully I can sell them on ebay and use the money to get some that will fit.
-
Are they not stamped with any info.
-
you can just measure the pcd - you can't guess just based on a website, as who knows what fitment they have been available in.
on 5 stud wheels, measure the distance between the very centre of 2 adjacent bolt holes and times the figure by 1.7012 to get the pcd figure (won't be perfect but it will be close enough for you to know if they are 5/120)
-
Measured it and it was 9.5 cm
So converted to mm and got 95 x 1.7012 = 161.61. Now I'm confused lol!
-
you sure your doing it right?
(http://www.discount-towing.co.uk/home/images/pcd_calculation.jpg)
-
No I wasn't I'll be right back with the correct figure lol!
Right the correct figure is 60mm
So............... 60 x 1.7012 = 102.07.
With that figure would that mean they are possibly 5 x 100.
-
Where are Steve and jv when ya need them again lol.
-
its as near dam it 5x100. take a wheel off and see if they fit :wink:
-
wold these fit a mk4 golf, and fancy sellin em :P i really like em haha
-
I've tried to trial fit them yesterday. Problem is I just have the jack out of the boot and the wheel is rusted on to the hub lol. Can't get enough room underneath/behind the wheel to get it off. Don't trust the jack enough to lay underneath the car. Looking to get a trolley jack and axle stands from halfords so will give it another go then. Anything I can use to help get the wheel off?
Also tom, I maybe interested in selling them. They aren't the wheels I ideally want but was going to get some tyres and see how they looked. They are all in pretty good nick with just a few scuffs on them. I'll have a good look over them later and take some pics of them all if you like.
-
Save yourself some time and measure the centre bore :wink:
-
Done that thanks to Steve and jv and it come back at 102 so pretty sure they are. But if I'm gunna sell them it's best to know for sure really.