GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: pitchy on 12 March 2010, 22:10

Title: think these would look smart
Post by: pitchy on 12 March 2010, 22:10

http://cgi.ebay.co.uk/19-MG-ZT-ALLOYS-ROVER-75-ALLOYS_W0QQitemZ150420723569QQcmdZViewItemQQptZUK_CarParts_Acc_Wheels_tyres_Trims_Car_Rims_ET?hash=item2305c61771

what u reckon?

Title: Re: think these would look smart
Post by: topher on 12 March 2010, 22:14

you'll probably need to grind the centre bore out of the wheel a bit to get it on the hub.. or onto the spacer which you might need to clear the innards at that offset.. they look a bit like the later r32 wheels.. omanyt or something. Personally though i'd never put something intended for a rover on my car :grin:

Title: Re: think these would look smart
Post by: prowler on 12 March 2010, 22:15

nice but i recon they look to much like the old TT rims

Title: Re: think these would look smart
Post by: pitchy on 12 March 2010, 22:19

GRIND!!! :shocked: :shocked: :shocked:
think id machine them out at work lol

Title: Re: think these would look smart
Post by: Grand Master Patch on 12 March 2010, 22:23

Bit of 80 grit sandpaper will do the job :wink:

Title: Re: think these would look smart
Post by: bobbarley on 12 March 2010, 22:25

They look alright, but IMO not worth the effort considering they'd be a mission to get them to fit  :sad:

Title: Re: think these would look smart
Post by: pitchy on 12 March 2010, 22:27

take me a hour at work so not that bad for me :grin:
looking for something different , quite like these

Title: Re: think these would look smart
Post by: Wayne on 13 March 2010, 00:32

Center bore is 56.1 Golf is 57.1, only other issue you may find is the bolt holes will be to small as I am sure a 75 is studs.

Title: Re: think these would look smart
Post by: BaV on 13 March 2010, 09:01

As Toph said these to me are dead ringers for the later Mk5 R32 wheels, you must be able to get them in mk4 fittment.

http://cgi.ebay.co.uk/18-NEW-R32-ALLOY-WHEELS-VW-GOLF-MK5-MK6-SCIROCCO-TT-A3_W0QQitemZ370348650208QQcmdZViewItemQQptZUK_CarParts_Acc_Wheels_tyres_Trims_Car_Rims_ET?hash=item563a7feee0

Title: Re: think these would look smart
Post by: Dan_GTI on 13 March 2010, 09:51

are the worth risking when youve got to mod the bore by 1mm and the stud holes?

just buy mk5 r32's IMO  :laugh:

Title: Re: think these would look smart
Post by: topher on 13 March 2010, 11:25

Quote from: BaV on 13 March 2010, 09:01

As Toph said these to me are dead ringers for the later Mk5 R32 wheels, you must be able to get them in mk4 fittment.

http://cgi.ebay.co.uk/18-NEW-R32-ALLOY-WHEELS-VW-GOLF-MK5-MK6-SCIROCCO-TT-A3_W0QQitemZ370348650208QQcmdZViewItemQQptZUK_CarParts_Acc_Wheels_tyres_Trims_Car_Rims_ET?hash=item563a7feee0

and if you can't - i have some ats 5x112 adaptors for mk4 fitment :smug:

Title: Re: think these would look smart
Post by: BaV on 14 March 2010, 10:07

Quote from: topher on 13 March 2010, 11:25

Quote from: BaV on 13 March 2010, 09:01

As Toph said these to me are dead ringers for the later Mk5 R32 wheels, you must be able to get them in mk4 fittment.

http://cgi.ebay.co.uk/18-NEW-R32-ALLOY-WHEELS-VW-GOLF-MK5-MK6-SCIROCCO-TT-A3_W0QQitemZ370348650208QQcmdZViewItemQQptZUK_CarParts_Acc_Wheels_tyres_Trims_Car_Rims_ET?hash=item563a7feee0

and if you can't - i have some ats 5x112 adaptors for mk4 fitment :smug:

Yeah boi!