GolfGTIforum.co.uk

Model specific boards => Golf mk2 => Topic started by: dannydubs on 11 March 2010, 21:02

Title: quickie on a hose
Post by: dannydubs on 11 March 2010, 21:02

ive just pt a new engine in my 8v and i cant for the life of me remember where the vacume hose from the clocks goes at the engine end where does it pluck in.

Title: Re: quickie on a hose
Post by: Mew on 11 March 2010, 21:19

I think there's a t-piece coming from the servo vacuum hose mate. Might be wrong, just trying to go off memory

Title: Re: quickie on a hose
Post by: dannydubs on 11 March 2010, 21:26

all that is connected up theres no where for it to plug into there

Title: Re: quickie on a hose
Post by: Mew on 11 March 2010, 21:39

Oh. I'm sure there's a diagram knocking about somewhere online...

Title: Re: quickie on a hose
Post by: stupot115 on 11 March 2010, 22:08

I think it goes on the manifold right next to or on the throttle body. hope this helps.

Title: Re: quickie on a hose
Post by: fused on 12 March 2010, 08:57

Might be wrong (been known  :cry:) but if it's a thin white/opaque pipe then it might be.....

conected to the odd looking "thingy majig"  :shocked: attach to the vacuum pipe coming off the inlet manifold, on the right hand side, goes to hard plastic then goes back round to the brake servo?

Title: Re: quickie on a hose
Post by: rubjonny on 12 March 2010, 10:19

yep as fgused says, there should be 2 small nipples on the chunky pipe to the brake servo. the vac pipe from the clocks runs to one of these nipples, the other one is blanked off, as is the larger vac connection on there.