GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: oliver07 on 26 February 2010, 19:52
-
Hi guys
when we have our cam belts changed do I need to buy the tensioner as well as the water pump and the belt ?
Any places for the best prices for these
. thanks
-
It should come as part of a kit
-
where is the best place to buy this
:wink:
-
Hi guys
when we have our cam belts changed do I need to buy the tensioner as well as the water pump and the belt ?
Any places for the best prices for these
. thanks
As tim says :wink: and try your local trade parts specialists cheaper than vw you'll require :
1.8T 98>00 vin >>1JY850000 06A 198 119 A £49.75 vw= £76.54
1.8T 00> vin 1JY850001>> 06A 198 119 B £53.88 vw= £82.89
these are the latest prices from t.p.s :wink:
-
Are you doing it yourself? Are you a trained mechanic?
-
Are you doing it yourself? Are you a trained mechanic?
You don't have to be a 'trained mechanic' to do this.
-
no my mate is a bmw/ merc specialist he does all the work on the golf I buy the parts he fits them
was going to go for lucus parts what do you think.
-
no my mate is a bmw/ merc specialist he does all the work on the golf I buy the parts he fits them
was going to go for lucus parts what do you think.
may well be cheaper but imo its best to fit genuine vag parts really
-
You don't have to be a 'trained mechanic' to do this.
who said you had to be a trained machanic?
-
You don't have to be a 'trained mechanic' to do this.
who said you had to be a trained machanic?
No one did. As I said, you don't have to be.
-
Well fitting a cambelt is not for the DIY guy thats for sure, you really would benefit from past experience, don't do the job properly, crank the engine, bend the valves. job well done there. Think thats the point TJG was making.
-
Well fitting a cambelt is not for the DIY guy thats for sure, you really would benefit from past experience, don't do the job properly, crank the engine, bend the valves. job well done there. Think thats the point TJG was making.
Fitting a cambelt is for the DIY guy.
You only need a half decent socket set, at most a few other inexpensive tools.
-
But not every one possesses common sense or the ability to take things apart. Cambelt can be done by a competent DIYer but if you fall shirt of that get a garage to do it
-
But not every one possesses common sense or the ability to take things apart. Cambelt can be done by a competent DIYer but if you fall shirt of that get a garage to do it
+1 :smiley:
-
what time is involved for the complete change including the water pump thanks
-
Book time 2.5 hours
-
what time is involved for the complete change including the water pump thanks
http://forums.vwvortex.com/zerothread?id=2840728