GolfGTIforum.co.uk

Model specific boards => Golf mk6 => Topic started by: Captain Sensible on 12 February 2010, 14:34

Title: Mark Five Alloys Do They Fit Mark 6
Post by: Captain Sensible on 12 February 2010, 14:34

Going to buy a set of BBS alloys on EBay. Says they are for Mark 4 Mark 5 Golf. Is it the same stud pattern for mark 6.
Thanks for any help.

Title: Re: Mark Five Alloys Do They Fit Mark 6
Post by: Snoopy on 12 February 2010, 14:36

Quote from: Captain Sensible on 12 February 2010, 14:34

Going to buy a set of BBS alloys on EBay. Says they are for Mark 4 Mark 5 Golf. Is it the same stud pattern for mark 6.
Thanks for any help.

Yes mk5 and mk6 are the same iirc 5 x 112mm PCD, 51mm offset. But i thought the mk4 was 100mm? :undecided:

Title: Re: Mark Five Alloys Do They Fit Mark 6
Post by: Captain Sensible on 12 February 2010, 15:09

Quote from: Snoopy on 12 February 2010, 14:36

Quote from: Captain Sensible on 12 February 2010, 14:34

Going to buy a set of BBS alloys on EBay. Says they are for Mark 4 Mark 5 Golf. Is it the same stud pattern for mark 6.
Thanks for any help.

Yes mk5 and mk6 are the same iirc 5 x 112mm PCD, 51mm offset. But i thought the mk4 was 100mm? :undecided:

Thanks for that Snoopy here is what the seller worte

Quote

This auction is for 4x BBS Ck015's Alloy wheels 18" Offset35 Rim Width 8J
These were bought for my MK4 Golf but are no longer required

?

Title: Re: Mark Five Alloys Do They Fit Mark 6
Post by: Snoopy on 12 February 2010, 15:33

Its prob worth asking in the mk5 section as they love to mod, You can fit 112 PCD to 100 PCD with wobble bolts but its not something i like the idea of myself. :lipsrsealed:

Also watch for anything on ebay that says 'style' that meens its a copy.

Title: Re: Mark Five Alloys Do They Fit Mark 6
Post by: FamilyDub on 12 February 2010, 17:00

Quote from: Snoopy on 12 February 2010, 15:33

You can fit 112 PCD to 100 PCD with wobble bolts

'wobble bolts'? Hmmmm... No thanks.

Pretty sure MKV-MKVI (either way) is probably fine. MKIV, not so.

Title: Re: Mark Five Alloys Do They Fit Mark 6
Post by: Freakinsweet on 12 February 2010, 17:56

I have my old MK5 R32 Omanyt 18-inch wheels on right now. No problem, straight fit.

Title: Re: Mark Five Alloys Do They Fit Mark 6
Post by: R32UK on 12 February 2010, 18:26

MK4 definately dont fit the MK5 or MK6 without changes.

MK5 will defo fit MK6....... well cos they is the same car innit  :grin:

Title: Re: Mark Five Alloys Do They Fit Mark 6
Post by: jv on 12 February 2010, 18:32

wobble bolts are for small pcd changes, not that kind of different!

adapters would make it possible, approx 200 a set of 4 but you need to allow for the offset change. so you would be running et15, all in all, probably not that sensible captain :afro:

Title: Re: Mark Five Alloys Do They Fit Mark 6
Post by: Exonian on 12 February 2010, 19:26

You'll struggle with ET35 getting under the front arches whether the bolt pattern is correct or not

Title: Re: Mark Five Alloys Do They Fit Mark 6
Post by: trueman on 16 February 2010, 01:59

.

MK5 will defo fit MK6....... well cos they is the same car innit  :grin:
[/quote]

mmmm look different to m,e
Much more stylish less aggressive