GolfGTIforum.co.uk
Model specific boards => Golf mk3 => Topic started by: daytona on 27 January 2010, 18:45
-
ive changed the leads,plugs,coil,oil,air filter,new antifreeze and thermostat,new starter and alternator(i know nothing to do with what im askin,but said it anyway)but the car still idles lumpy when warmed up.Am i missing something that i could change on top of what ive already done???its an 8v,other than putting a match to it,which i could easy do,as im sick to my back teeth on spending on this car,bought for £1500,and ive spent that again on what needed doin...all mechanical.pi**in traiders should be shot.
-
clean throttle body and swap the temp sensor.... both are what I would do as part of a service (due to the reliability of both!)
-
ill do that soon,cheers :smiley:
-
any recommendation on what to clean the throttle bodies with,either a squirt thru on throttle off job..anyone!!!!!!
-
I use carb cleaner and the wife's tooth brush.... It's easier if you remove it and clean both sides till they shine but can be done fitted (just not as good)
-
cheers,ill wait till the gf pi**es me off and use hers!
-
I had no carb cleaner to hand so used WD40 and an old toothbrush. Give it a good scrub and clean out thoroughly after. Will run like new and cost nothing for the privilege. Good Luck Deano