GolfGTIforum.co.uk

Model specific boards => Golf mk3 => Topic started by: gti jed on 29 December 2009, 18:41

Title: vr6 conversion loom?
Post by: gti jed on 29 December 2009, 18:41

i have and 2.0 8v and i am putting a vr6 aaa engine in i have the whole car with the vr6 i was just wondering do you only need the engine loom that comes out the drivers side bulk head into the back of the fusebox?? i imagine the abs and lighting loom is all the same it appears so anyway

Title: Re: vr6 conversion loom?
Post by: zdebx on 29 December 2009, 19:09

It's not that simple...

http://www.golfgtiforum.co.uk/index.php?topic=124485.0

Title: Re: vr6 conversion loom?
Post by: gti jed on 29 December 2009, 19:29

i have seen that thread and i know about everything else but i just dont understand about the loom

Title: Re: vr6 conversion loom?
Post by: Wayne on 29 December 2009, 19:34

Quote from: gti jed on 29 December 2009, 19:29

i have seen that thread and i know about everything else but i just dont understand about the loom

You can use just the engine loom I believe, fusebox foward.

Title: Re: vr6 conversion loom?
Post by: boneybradley on 29 December 2009, 19:36

the only issue maybe whether it's obd1 or 2 (both car and engine) as the obd2 has a few more wires due to stricter emmisions!

Title: Re: vr6 conversion loom?
Post by: gti jed on 29 December 2009, 19:38

im not to sure how to tell the difference but i think its obd1 as its a 92 plate running on dizzy

Title: Re: vr6 conversion loom?
Post by: VR6-Joe on 29 December 2009, 19:39

You are correct sir!

Title: Re: vr6 conversion loom?
Post by: gti jed on 29 December 2009, 19:47

also does anyone know where the best place is to buy the water pipe that runs across the front of the engine (crack pipe)