GolfGTIforum.co.uk
Model specific boards => Golf mk3 => Topic started by: robertb2700 on 27 December 2009, 11:55
-
as the title really :smiley: looking to clean the inside of my headlights as one looks a bit grubby after sitting in a garage for 6months while the vento front was on. are they easy to seperate once they're off the car? if so how do i go about this? any help would be great :cool:
-
remove the metal clips and stick the lights in the oven for a few minutes to soften the sealant (use common sense and don't have the oven at 1000degrees) and they should pull apart (use a sharp knife to remove/cut the sealant) and they should separate easy enough!
ensure you clean all the old sealant off and ensure you reseal them properly of they will mist/discolour quickly
-
remove the metal clips and stick the lights in the oven for a few minutes to soften the sealant (use common sense and don't have the oven at 1000degrees) and they should pull apart (use a sharp knife to remove/cut the sealant) and they should separate easy enough!
ensure you clean all the old sealant off and ensure you reseal them properly of they will mist/discolour quickly
thanks, will give this a wee bash during the week :smiley: