GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: Grand Master Patch on 14 December 2009, 21:08

Title: AGU Question?
Post by: Grand Master Patch on 14 December 2009, 21:08

Got my catch tank installed yesterday,pretty easy job.While removing the pcv and related pipework i noticed a bracket that had three electrical connectors under the inlet manifold.Can anyone shed any light on what these three wires are for? Non of it was present on the AUM which was done at the same time.

Title: Re: AGU Question?
Post by: topher on 14 December 2009, 21:10

knock sensor (orange?), crank position sender (grey?).. and i forget the other one..

Title: Re: AGU Question?
Post by: Grand Master Patch on 14 December 2009, 21:14

Thanks for clearing that up.

It's just crazy how these 1.8T engine differ,we had two AUM's and both had different pipework to the pcv,mine was very different from either of them.
It's all in the boot now :grin:

Title: Re: AGU Question?
Post by: Dub-77 on 14 December 2009, 21:23

Got any pics??

Title: Re: AGU Question?
Post by: Grand Master Patch on 14 December 2009, 21:25

I don't think any were taken,but it's easy enough to see with the lower engine cover off.

Title: Re: AGU Question?
Post by: Dub-77 on 14 December 2009, 21:36

Quote from: Grand Master Patch on 14 December 2009, 21:25

I don't think any were taken,but it's easy enough to see with the lower engine cover off.

Sorry i meant of the oil catch tank install  :laugh:

Title: Re: AGU Question?
Post by: topher on 14 December 2009, 22:02

Quote from: Grand Master Patch on 14 December 2009, 21:14

Thanks for clearing that up.

It's just crazy how these 1.8T engine differ,we had two AUM's and both had different pipework to the pcv,mine was very different from either of them.
It's all in the boot now :grin:

auq is slightly different again, and 225 engines weirdly have it sitting on the cam cover... there is reasoning for it all, but it makes ordering new pipes a pain.