GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: sarahs_gti on 02 December 2009, 11:59
-
As title really, does anyone know if a Milltek stainless cat back system will fit straight onto a MK4 5 door golf turbo?
Ta
-
Would have thought they would be slightly different easiest thing to do would be go to VW and ask at the parts department if they can print you off a picture of the exhaust parts diagram and do the same with Seat and compare the 2.
Hope that helps :cool:
-
Easiest way is up ask miltek or go to their website and see have they got the same part number .... because is an aftermarket part there is a high possiblity that it with fit as they tend to design the exhaust to fit most 1.8t ..
-
I doubt it,they look very different to me.
-
Cupra =
(http://roadrunnermotorsport.co.uk/ebay/images/ScorpionleoncupraRexhaust.JPG)
Mk4 =
(http://roadrunnermotorsport.co.uk/EBAY/IMAGES/GOLF1.4%201.6.JPG)
-
That's a definite no then,the lcr looks like it bolts onto the twin cat system to me.
-
Front hanging bracket on the backbox looks longer on the LCR. Also there is another bracket on the middle pipe on the LCR.
-
As title really, does anyone know if a Milltek stainless cat back system will fit straight onto a MK4 5 door golf turbo?
Ta
I know where you have seen that :wink:.
Im also on the idear that it will not fit without some sort of modding.
-
anyone actually checked the Milltek website? :huh:
look here
http://www.roadrunnermotorsport.co.uk/index.asp?frame=/milltek-exhaust-volkswagen.asp
front axle and middle parts have the same part number :nerd:
-
Would have thought they would be slightly different easiest thing to do would be go to VW and ask at the parts department if they can print you off a picture of the exhaust parts diagram and do the same with Seat and compare the 2.
Hope that helps :cool:
award for the most complicated yet least useful reply of 2009 goes to... the dude with the vectra!
-
Would have thought they would be slightly different easiest thing to do would be go to VW and ask at the parts department if they can print you off a picture of the exhaust parts diagram and do the same with Seat and compare the 2.
Hope that helps :cool:
award for the most complicated yet least useful reply of 2009 goes to... the dude with the vectra!
:grin: :grin: :grin:
-
Would have thought they would be slightly different easiest thing to do would be go to VW and ask at the parts department if they can print you off a picture of the exhaust parts diagram and do the same with Seat and compare the 2.
Hope that helps :cool:
award for the most complicated yet least useful reply of 2009 goes to... the dude with the vectra!
How rude I was having an off day :embarassed: :drool: :laugh:
I would say something back about your motors but i like them all so ill :lipsrsealed: