GolfGTIforum.co.uk
General => The garage => Topic started by: westallc on 28 November 2009, 22:38
-
hi im new to the forum and this is my first post so hello everyone lol
nick i came to you last month and had the gen 4 map skoda octy vrs reg B^ VRS
it only made 211 so was down a bit and i have now replaced the bits you said. it now has a new n75 old one was broken. new dv 007p with yellow spring and the lower boost pipes have been changed.
would it be poss to bring the car back to you for a re run on the rollers and some tweaks to the map to get a wee bit more. ( only use super unleaded fuel) would the 15th be a good day.
as im in reading so need to organise this as its a bit of a treck lol
if this is a good day how much extra is this going to cost me??
all the best and so far well pleased great map nick
-
Your mate in the yellow octavia came back today for his map. Exact same one that i loaded on to yours and he made 225bhp, so there's your target :grin:
-
i must say since i did the other bits it really does feel good but i just want to see the figure on the rr as before i thought it pulled well and only made 200 before your map....
it will also confirm that i found the mechanical fault if i havent its back to the drawing board lol
is there much more to be gained from a play with the map if it is running right?
-
actually could we make it the 16th of december???
-
Should be fine. I'll make sure Nick sees this thread and one of us will check the diary on monday and get back to you :afro:
-
hi im new to the forum and this is my first post so hello everyone lol
nick i came to you last month and had the gen 4 map skoda octy vrs reg B^ VRS
it only made 211 so was down a bit and i have now replaced the bits you said. it now has a new n75 old one was broken. new dv 007p with yellow spring and the lower boost pipes have been changed.
would it be poss to bring the car back to you for a re run on the rollers and some tweaks to the map to get a wee bit more. ( only use super unleaded fuel) would the 15th be a good day.
as im in reading so need to organise this as its a bit of a treck lol
if this is a good day how much extra is this going to cost me??
all the best and so far well pleased great map nick
Hello M8!
Welcome to the forum,
On the 15th there is Hulmies AGU booked in the diary for a ko3s turbo conversion and custom mapping session. There is a question mark next to his booking slot as he need to comfirm it next week. PM me your number and I wil give you a call, if I can get to use another ramp to fit the turbo then yes you can come down and play. There is lots of room to play with your current map as its a strong spec1 we have been working on, its more like stage 1.5. I am sure we can give you even more power what will make you grin even more..lol The gen 4 map is on Chris car now as a beta spec2 version, a lot of work gone on the lambda and and timing maps not the boost or load
Chris is testing the car to make sure the way we have mapped the fuel dont have a really back effect on the MPG. but he drives flat footed everywhere so the MPG results are pants at the momnet...
The guy with the yellow octy (sorry forgot his name) went away happy today, from a stock power of 197bhp to 225bhp 250lbft, teething issues with compressor surge do to to much pre load on the waste gate one turn back of the nut and now at 19/20psi, very nice and linear curve as it should be.
You should seeing more of us on Briskoda soon, The owner has said we can become a sponsor..lol and lift my ban from Fatty500. :grin:
Nick
-
I type too slow then my internet connection fecks up..lol
The 16th Dec will be spot on m8! I will book you in.
Its not about the peak bhp/torque is how much is under the curve..lol
Nick
-
okay cool buddy really the aim is to make sure she is running right this time im sure it is :smiley:
dont worry about fatty500 he tried to ban me before lol
so i will leave early on the 16th to be with you not to late
how much extra will i need to pay nick???
number is 07904812752
-
also is it poss for you to map in water methanol at a later date???
-
so nick are we all good for the 16th????
also i have asked before but how much is this rr going to cost me or is it free play time???
all the best
clive
-
so nick are we all good for the 16th????
also i have asked before but how much is this rr going to cost me or is it free play time???
all the best
clive
Hello m8,
Your looking at £65 for the rr time, diagnostics, software & hardware tweaks.. To get the most power from the water/meth charge cooling, you need more ignition advance in the mapping but when not on the water/meth the timing would need to be put back, good if you was running standalone or a revo map where you can switch the timing setting at the touch of a button, ie when on water/meth mix you run the top setting, then when out of water/meth you run a lower setting.
Without the ignition mapping you will still gain power from the water/meth because you will get a denser cooler combustion which = more power. In this case you dont need to touch your ecu remapping at all, but you need to have the water/meth injection set up right. if your using a mappable water//meth setup you can set the system to deliver the mix in a linear fasion to get the most from the mix, get it wrong you will lose power.
Nick
-
okay mate will you give it a once over aswell etc etc trying to explain to the missus why i need to spend another £65 when i only paid £250 3 weeks ago lol
i will try and get to you as early as poss what time do you open as i may leave really early to avoid traffic