GolfGTIforum.co.uk

Model specific boards => Golf mk3 => Topic started by: vwgolfowner on 23 November 2009, 23:16

Title: Put my Golf MK3 Alloys onto a Peugout 306?
Post by: vwgolfowner on 23 November 2009, 23:16

So I crashed my VW GOLF Mk3 (Not GTI) :(

Was wondering if I could put my alloys from this car onto a Peugout 306? If wheels are the same size?

Title: Re: Put my Golf MK3 Alloys onto a Peugout 306?
Post by: VR6-Joe on 23 November 2009, 23:24

Not unless the wheels are multi fitment, no

VW P.C.D is 4x100
Peugeot P.C.D is 4x108

Title: Re: Put my Golf MK3 Alloys onto a Peugout 306?
Post by: Wayne on 23 November 2009, 23:35

Ford alloys will fit a Pug with spiggot rings.

Title: Re: Put my Golf MK3 Alloys onto a Peugout 306?
Post by: vwgolfowner on 24 November 2009, 03:44

There no attachment or anything I would get to make it work?

Title: Re: Put my Golf MK3 Alloys onto a Peugout 306?
Post by: Wayne on 24 November 2009, 07:54

Quote from: vwgolfowner on 24 November 2009, 03:44

There no attachment or anything I would get to make it work?

Not really as adaptors will screw up the offset.

Title: Re: Put my Golf MK3 Alloys onto a Peugout 306?
Post by: vwgolfowner on 24 November 2009, 19:35

Ok thanks :D

Title: Re: Put my Golf MK3 Alloys onto a Peugout 306?
Post by: Mikester on 24 November 2009, 19:56

Adapters will cost 4 times more than the wheels are worth too.

Title: Re: Put my Golf MK3 Alloys onto a Peugout 306?
Post by: Wayne on 25 November 2009, 09:18

Quote from: Mikester on 24 November 2009, 19:56

Adapters will cost 4 times more than the wheels are worth too.

Good point

Title: Re: Put my Golf MK3 Alloys onto a Peugout 306?
Post by: vwgolfowner on 26 November 2009, 03:15

How much roughly would an adapter cost for all 4 wheels?

It seems such a waste scrapping these alloys, when my 306 has just plastic.

Title: Re: Put my Golf MK3 Alloys onto a Peugout 306?
Post by: Wayne on 26 November 2009, 09:22

Quote from: vwgolfowner on 26 November 2009, 03:15

How much roughly would an adapter cost for all 4 wheels?

It seems such a waste scrapping these alloys, when my 306 has just plastic.

Never worth the expense, adaptors are going to cost you £150 to £250

Title: Re: Put my Golf MK3 Alloys onto a Peugout 306?
Post by: VR6-Joe on 26 November 2009, 10:25

How about sell the VW alloys and buy some proper Peugeot ones?

Cheaper AND easier

Title: Re: Put my Golf MK3 Alloys onto a Peugout 306?
Post by: boneybradley on 26 November 2009, 10:33

wobble bolts (should be ok for 2mm but you'll need spiggots too)  :huh:

Title: Re: Put my Golf MK3 Alloys onto a Peugout 306?
Post by: Wayne on 26 November 2009, 10:55

Quote from: boneybradley on 26 November 2009, 10:33

wobble bolts (should be ok for 2mm but you'll need spiggots too)  :huh:

Peugeot is 4x108 and Golf is 4x100

Title: Re: Put my Golf MK3 Alloys onto a Peugout 306?
Post by: JC on 26 November 2009, 10:59

chemical metal the holes, re drill, job done :afro:




.






.







Joke btw  :laugh:

Title: Re: Put my Golf MK3 Alloys onto a Peugout 306?
Post by: boneybradley on 26 November 2009, 11:15

I read that as 5x98  :shocked:

Title: Re: Put my Golf MK3 Alloys onto a Peugout 306?
Post by: JC on 26 November 2009, 11:17

double fail then BB, as its a NON gti so 4 stud anyway  :laugh:

and you say you laugh at me  :grin:

Title: Re: Put my Golf MK3 Alloys onto a Peugout 306?
Post by: Len on 26 November 2009, 13:20

But 100 to 108 is only 4mm out! Not 8mm.

You go by the radius.