GolfGTIforum.co.uk

Model specific boards => Golf mk2 => Topic started by: maxp on 22 November 2009, 14:30

Title: Chopped wire on harness? [img]
Post by: maxp on 22 November 2009, 14:30

Was nosing around the scuttle and saw there was a wire (highlighted) that isnt connected to anything and looks snipped.

Is this ok?

Also does anyone know what the wires on this plug are for or what signals they carry?

The car is a digifant / pb

(http://imgur.com/mrzX8.jpg)

Title: Re: Chopped wire on harness? [img]
Post by: E4EVV on 22 November 2009, 14:58

I would say they are for the ignition module thats sat on top of your ECU.
Does your motor work ok?

Title: Re: Chopped wire on harness? [img]
Post by: mattkh on 22 November 2009, 15:18

Hi
1. What is the color of the wire ?
2. If you follow this wire to the connector, what number hole is it going into ?

Title: Re: Chopped wire on harness? [img]
Post by: maxp on 22 November 2009, 15:26

Quote from: mattkh on 22 November 2009, 15:18

Hi
1. What is the color of the wire ?
2. If you follow this wire to the connector, what number hole is it going into ?

1. Is red/white.
2. If your standing where i took the photo, it comes from the furthest of the five holes, on the left side of the plug.

Title: Re: Chopped wire on harness? [img]
Post by: mattkh on 22 November 2009, 17:43

Hi
I think it is to do with the Lambda sensor.

Title: Re: Chopped wire on harness? [img]
Post by: Mr Blue on 22 November 2009, 23:24

I asked this a while ago. Its normal on 8v digi's (non g60)

Title: Re: Chopped wire on harness? [img]
Post by: Sam on 22 November 2009, 23:55

Flux capacitor??

Title: Re: Chopped wire on harness? [img]
Post by: Sam on 22 November 2009, 23:55

Quote from: caistor_bmx on 22 November 2009, 23:55

Flux capacitor??

+1