GolfGTIforum.co.uk

Model specific boards => Golf mk2 => Topic started by: farmer on 10 November 2009, 17:50

Title: hall sender
Post by: farmer on 10 November 2009, 17:50

hi all I put a post up a little while back when my car kept cutting out I've put new leads and dizzy cape and also a new rotori arm. Still starts and cuts out randomly I have a new hall sender how hard is this to change as I don't rely want to mess up the timing any tip would be great thanks luke

Title: Re: hall sender
Post by: rubjonny on 11 November 2009, 08:34

car?

Title: Re: hall sender
Post by: farmer on 11 November 2009, 12:18

89 gti 8v I've got another problem now can't move the dizzy

Title: Re: hall sender
Post by: rubjonny on 11 November 2009, 13:52

check the digifant tuning guide :)

Title: Re: hall sender
Post by: farmer on 12 November 2009, 14:12

Hi all I'm managed to get the dizzy out but I can't get it apart. In my haynes manual is say it has a circlip that holds the triger wheel on but my dizzy does not have one. It looks like its been pressed on. Any advie would be a big help cheers luke

Title: Re: hall sender
Post by: rubjonny on 12 November 2009, 14:54

I think on the big block dizzy the rotor is just pressed on liek you say, tricky to remove with out damaging it so be carefull. I think a screwdriver either side levered upwards would do the trick?