GolfGTIforum.co.uk

Model specific boards => Golf mk2 => Topic started by: jamrock on 08 November 2009, 13:12

Title: isv wiring problem, green and black wire
Post by: jamrock on 08 November 2009, 13:12

ive managed to get hold of an isv controller and loom. ive pluged it into the engine loom coming into the fuse box. There is however two wires which i can not work out were to plug up to.

a green wire with a spade connector
and
a black wire.

does anyone have an idea were it goes.

i have found a wiring diagram thanks to Rubjonny but im not understanding from that where they plug up. to me it looks like the green one does not plug up to anything :undecided:

Title: Re: isv wiring problem, green and black wire
Post by: Mew on 08 November 2009, 19:37

Don't know what you're putting it in, but when converting my mk2 from 8v to 16v the green wire was left disconnected. Can't remember a black one being left disconnected though.

Title: Re: isv wiring problem, green and black wire
Post by: jamrock on 08 November 2009, 21:50

cheers mew!! im putting a 16v lump into an 8v shell :evil:

like your project.

Title: Re: isv wiring problem, green and black wire
Post by: rubjonny on 09 November 2009, 09:27

as above, green is unused. black wire is ignition live :)

Title: Re: isv wiring problem, green and black wire
Post by: jamrock on 09 November 2009, 11:11

cheers jonny. something to do over the weekend than!!!!  :nerd: