GolfGTIforum.co.uk
Model specific boards => Golf mk2 => Topic started by: ben harcombe on 02 November 2009, 21:28
-
Just bought some SEAT wheels , 4 stud magnesium OZ 18" they say didier auriol on them with 3 michelin competition use only 20/65/18 tyres. Prt number is 363 99 18 , can anyone tell me if they would fit my mk2 gti golf? and does anyone have any information on them , i've been told they are from a rally car and will not fit any standard car. I have searhed for information on them but not really found anthing.
-
20/65/18 - what are they, racing bicycle tyres?!
With you being the owner of them - surely the easiest way would be just to remove a wheel off your car and see?
-
It says 205-65-18 but I fit tyres for a living and they look more like 50 profile. Can somebody give me a link so I can find info from the part number , I dont have access to my car at the moment so fittings not a option.
-
Well 65% of 205mm on an 18 inch wheel will look thin.
18's on a MK2 will look poopy :sick:
-
maybe so ben but will they fit 4x100 from the part number was the question originally
-
seats 4 studs tend to be 4x100 yes.
18" oz's with rubber band tyres tucked under the arches of a slammed mk2 would look epic. get it done!
-
seats 4 studs tend to be 4x100 yes.
18" oz's with rubber band tyres tucked under the arches of a slammed mk2 would look epic. get it done!
go for it.
-
Yer im with go for it. The arches may take a lil work non??
-
I myself thought they would be 4x100 their defo SEAT and Auriol's 100%
I've found he drove the cordoba wrc evo2 and if they were 5stud i'd have thought 5x100 vr6 hub conversion maybe but their 4stud and all SEAT are 4x100 before they were converted th 5studs
WTF is my local mechanic talkin about special stud patterns on the rally cars
-
seats 4 studs tend to be 4x100 yes.
18" oz's with rubber band tyres tucked under the arches of a slammed mk2 would look epic. get it done!
+1 go for it.
you must be havin a giraffe :laugh:
-
Dude those wheels look mega cool! You gotta at least try em!!
-
tried them just on a new rover mgzr 4x100 and the holes on the wheels are miles away any suggestions as to what they would fit :undecided:
-
A Seat rally car...?
-
tried them just on a new rover mgzr 4x100 and the holes on the wheels are miles away any suggestions as to what they would fit :undecided:
You have the wheels, measure them!
-
i have measured the opposite holes to each other and with a ruler i'm getting 4x110 i've had a look online and its bringing up they are for a gen 1 mazda rx7 ??? confused ???
Why would SEAT CORDOBA'S be using mazda hubs
-
sure it's not 4x 108
-
what would make you think they're ford dannyp?
anyone know any more details on the cordoba evo2 can only find pics they are the 18 spoke badboys for reference
-
Citroen and others use 4X108, not just Ford.
-
i'm measuring from the middle of the bolt hole to the hole opposite and they are 4x110
-
PCD is pitch circle diameter, so you need to pin point the middle of the holes and draw the circle through them.
We need pictures here.
-
any tyre / wheel dealer or garage worth their salt should have a pcd measurer in their toolbox.
so you need to pin point the middle of the holes and draw the circle through them.
or just measure across the centre of the wheel, furthest hold edge from centre to nearest hole edge to centre. (this made sense in my mind, but doesnt when typed up).
-
measure diamiter of hole with digital vernier caliper, press zero button, measure across outside to outside. lazy and works o n 4 std rims