GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: topher on 30 October 2009, 21:04
-
To fit an AUM forge silicone TIP. I dare you to try and beat it :grin:
-
Good effort!
Toph, you know the unused bit that comes off near the airbox with a bung in it? Is it meant to sit where the Y shaped breather hose is?
-
It points at it/under it but you don't need to use that vac line on your engine.. only the later AUMs, that's why yours is plugged.
-
Correct, but the bung (metal bit) is destroying my breather even more than it already is!
Also, get Nick to email me my invoice on Monday :P PMed him my email address.
-
To fit an AUM forge silicone TIP. I dare you to try and beat it :grin:
28mins to fit a TIP and to pose for a photo shoot... :wink:
I told you that KY stuff you have in your glove box would come in handy one day.. :evil:
Good work there Chris. :smiley:
-
Correct, but the bung (metal bit) is destroying my breather even more than it already is!
Also, get Nick to email me my invoice on Monday :P PMed him my email address.
Hello M8
Can you send me an email to accounts@r-techpower.co.uk and I will send you the invoice via email.
Cheers Nick
-
Correct, but the bung (metal bit) is destroying my breather even more than it already is!
Also, get Nick to email me my invoice on Monday :P PMed him my email address.
Hello M8
Can you send me an email to accounts@r-techpower.co.uk and I will send you the invoice via email.
Cheers Nick
Could I get an invoice for the stuff I got done as well please?
-
Correct, but the bung (metal bit) is destroying my breather even more than it already is!
it shouldn't be touching it. i'll take a photo of mine to show you where it sits. It's possible the jubilee clip on the bottom has slipped and twisted slightly. Easiest way round that is to take the airbox lid off (disconnect maf) and see if there is any movement.. if not you'll have to nip under the car and slack the jubilee clip off a touch and twist it from the top till it's sitting right.
-
Correct, but the bung (metal bit) is destroying my breather even more than it already is!
Also, get Nick to email me my invoice on Monday :P PMed him my email address.
Hello M8
Can you send me an email to accounts@r-techpower.co.uk and I will send you the invoice via email.
Cheers Nick
Could I get an invoice for the stuff I got done as well please?
Can you send email aswell, include your Reg numbers so I can pull them from the PC.
Nick
-
Correct, but the bung (metal bit) is destroying my breather even more than it already is!
Also, get Nick to email me my invoice on Monday :P PMed him my email address.
Hello M8
Can you send me an email to accounts@r-techpower.co.uk and I will send you the invoice via email.
Cheers Nick
Could I get an invoice for the stuff I got done as well please?
Can you send email aswell, include your Reg numbers so I can pull them from the PC.
Nick
Sent, Do you have that picture of the R32 tips on my car?
Found it
-
Lots of pics here > http://s258.photobucket.com/albums/hh252/Rtechremaps/
Your empty Milltek box with a dwarf in side..lol
(http://i258.photobucket.com/albums/hh252/Rtechremaps/100_3298.jpg)
R32 derv
(http://i258.photobucket.com/albums/hh252/Rtechremaps/100_3308.jpg)
Tut tut
(http://i258.photobucket.com/albums/hh252/Rtechremaps/100_3306.jpg)
Allard egr delete pipe
(http://i258.photobucket.com/albums/hh252/Rtechremaps/100_3309.jpg)
ummm!!
(http://i109.photobucket.com/albums/n78/BizDontQuit/brokenfoot.jpg)
-
Correct, but the bung (metal bit) is destroying my breather even more than it already is!
it shouldn't be touching it. i'll take a photo of mine to show you where it sits. It's possible the jubilee clip on the bottom has slipped and twisted slightly. Easiest way round that is to take the airbox lid off (disconnect maf) and see if there is any movement.. if not you'll have to nip under the car and slack the jubilee clip off a touch and twist it from the top till it's sitting right.
Correct, but the bung (metal bit) is destroying my breather even more than it already is!
Also, get Nick to email me my invoice on Monday :P PMed him my email address.
Hello M8
Can you send me an email to accounts@r-techpower.co.uk and I will send you the invoice via email.
Cheers Nick
Done, with a few other enquiries.
Correct, but the bung (metal bit) is destroying my breather even more than it already is!
it shouldn't be touching it. i'll take a photo of mine to show you where it sits. It's possible the jubilee clip on the bottom has slipped and twisted slightly. Easiest way round that is to take the airbox lid off (disconnect maf) and see if there is any movement.. if not you'll have to nip under the car and slack the jubilee clip off a touch and twist it from the top till it's sitting right.
that would be great, think mine needs adjusting then although it shouldn't be too bad with an uprated breather hose.
-
ummm!!
(http://i109.photobucket.com/albums/n78/BizDontQuit/brokenfoot.jpg)
Learnt my lesson there..........lol
Got them on my project thread now.
-
To fit an AUM forge silicone TIP. I dare you to try and beat it :grin:
28 minutes and 37 seconds to be exact... :wink:
-
For the non believers, here's an 'action' shot...
(http://i225.photobucket.com/albums/dd303/SkydiveMacca/rampupsm.jpg)
-
lol :shocked: :shocked:
Lets just say mine took me a bit longer than that :grin:
-
Give me a Forge tip and i will take you up on the challange lol!
-
Give me a Forge tip and i will take you up on the challange lol!
Come and use our ramps, if you can do it in less than 30 minutes i'll let you have the tip at trade cost :tongue:
-
Give me a Forge tip and i will take you up on the challange lol!
Come and use our ramps, if you can do it in less than 30 minutes i'll let you have the tip at trade cost :tongue:
now you say now i have fitted mine :grin: :tongue: good work tho chris as they are abit of a mission :lipsrsealed:
-
Give me a Forge tip and i will take you up on the challange lol!
Come and use our ramps, if you can do it in less than 30 minutes i'll let you have the tip at trade cost :tongue:
Sounds like a pizza delivery guarantee... Will they also get a free diet coke? :grin:
-
i feel some training coming on :grin: