GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Golf mk4 TDI => Topic started by: EuanGtTdi on 18 October 2009, 14:09
-
Hi guys,
was thinking of getting a boost gauge as my pal got one is his caddy van and i liked, was just wondering if i need the egr delet pipe to fit this or can fit it to the standard egr?
and is there anything else need?
any help cheers :smiley:
-
you don't need the EGR delete pipe; you can tap into the existing pipework.
However you need to make sure this is done tidily otherwise you'll just vent precious boost from the hole you've just made!
-
easier if you have a egr delete as its got the take off pipe to connect a boost gauge other wise you have to tap a hole in the plastic intercooler pipe
-
beat me to it :grin:
-
beat me to it :grin:
:tongue:
-
yeah cheers guys, were do get these delet pipes from or whts best one?
-
yeah cheers guys, were do get these delet pipes from or whts best one?
Here (http://shop.ebay.co.uk/proparts-europe/m.html?_nkw=&_armrs=1&_from=&_ipg=&_trksid=p4340)
Is yours the 115bhp though?? Might be worth dropping them an email to make sure it will fit.
Fairly sure the EGR is the same :undecided:
-
seen this one (http://cgi.ebay.co.uk/Breather-Oil-Catch-Tank-VW-Golf-Audi-Seat-Skoda-Tdi_W0QQitemZ170395115379QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item27ac571f73) Rhyso
-
seen this one (http://cgi.ebay.co.uk/Breather-Oil-Catch-Tank-VW-Golf-Audi-Seat-Skoda-Tdi_W0QQitemZ170395115379QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item27ac571f73) Rhyso
yeah - rubbish :tongue: Not had very good feedback on ukmkivs
-
yeah mines is 115 mate,
-
is there any special gauge i need to get aswel or does any do?
-
anyone?
-
0-35PSI should do the job
you DO NOT want a gauge showing minus figures
-
whys that rhyso why dont want one with minus on them?
you got any ideas were get a 0-35 one then mate?
-
whys that rhyso why dont want one with minus on them?
you got any ideas were get a 0-35 one then mate?
cos thats for petrol and they pull a a vacuum on idle
I got plenty of ideas thanks :tongue:
-
aww kool mate,
can tell me some of thses ideas please lol
-
aww kool mate,
can tell me some of thses ideas please lol
nope :laugh: :laugh: :laugh: :laugh: :laugh:
Try Awesome GTI :wink:
-
cheeers budddy :wink:
-
I've ordered mine now so here's the link :tongue:
http://www.awesome-gti.co.uk/product.php?xProd=3784&xSec=142
:grin: :grin: :grin:
-
think im aswel getting the bottom one for £132 rhyso in the link?
cause when add evrything egr delet, gague and pod think be more than that hole kit
http://www.fuelefficientsystems.co.uk/index.php?page=egr-replacement-power-pipe-kits
-
I'm just going for the gauge - got a drivers side vent to play with
You going for the A Pillar mount??
you're looking at £200 for the pod, gauge and EGR delete :sad:
-
okay mate,
emm dont mind were its mounted about window, pillar, dash anywere lol
turning out more costly than i thought lol
-
okay mate,
emm dont mind were its mounted about window, pillar, dash anywere lol
turning out more costly than i thought lol
sorry i thought in your previous post you were on about a mount - what is it you saw for £132?? :huh:
-
http://www.fuelefficientsystems.co.uk/index.php?page=egr-replacement-power-pipe-kits
that mate includes everything but would need to see if cld put the smaller 51mm delet pipe in instead of the bigger 57
-
http://www.fuelefficientsystems.co.uk/index.php?page=egr-replacement-power-pipe-kits
that mate includes everything but would need to see if cld put the smaller 51mm delet pipe in instead of the bigger 57
ah right - thought you'd seen something on Awesome's website
Don't see why not - drop them an email :smiley: Only thing I'd be wary about is the quality of the gauge and pod :smiley:
-
yehh cheers mate,
my freind just got his hybrid and frount mount from them for his tdi..good quality stuff and prices arnt that bad too!
-
yehh cheers mate,
my freind just got his hybrid and frount mount from them for his tdi..good quality stuff and prices arnt that bad too!
has he fitted the FMIC?? Cos IIRC they are the new trading name for Allard and their FMIC isn't exactly plug and play.............
-
yes mate he has fitted the fmic with standard bumper and its fitted perfectly just had to cut a wee wee bit nothing noticeable on back and that was it!
looks nice and tidely
-
yes mate he has fitted the fmic with standard bumper and its fitted perfectly just had to cut a wee wee bit nothing noticeable on back and that was it!
looks nice and tidely
does he have the hard boost pipe kit or is it silicone pipes??
-
his pipes are metal and only got like 2-4 bits of of silcone at bits!
if want me to ask him anything abt it let me knw and i will ask um! he works a mechanic for vw so dont worry lol
-
they only do hard pipes dont they? they might have revised the pipe design to make it fit without modification :lipsrsealed:
-
his pipes are metal and only got like 2-4 bits of of silcone at bits!
if want me to ask him anything abt it let me knw and i will ask um! he works a mechanic for vw so dont worry lol
pictures and prices would be good :wink:
they only do hard pipes dont they? they might have revised the pipe design to make it fit without modification :lipsrsealed:
You'd hope by now they would have sorted the problems...... :lipsrsealed:
-
willl get some mate dont worry