GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: bobreece on 14 October 2009, 01:11

Title: bora clocks help
Post by: bobreece on 14 October 2009, 01:11

i have some bora sport clocks with a scratch on is there anyway of buffing or poliching it out? i heard of someone on this forum haveing same problem and buffing it out any help guys?

Title: Re: bora clocks help
Post by: old_n07 on 14 October 2009, 07:23

Patch did it, he used a dremel, braso and some plastic polish IIRC and they came up like new there is a thread about it over on UK-MKIVs but I can't find it at the moment :afro:

If you are using plastic polish then some sort of machine is recomended as it can take an age by hand but be careful not to burn the plastic :wink:

Neil

Title: Re: bora clocks help
Post by: northeast_gti-t on 14 October 2009, 12:07

Quote from: old_n07 on 14 October 2009, 07:23

Patch did it, he used a dremel, braso and some plastic polish IIRC and they came up like new there is a thread about it over on UK-MKIVs but I can't find it at the moment :afro:

If you are using plastic polish then some sort of machine is recomended as it can take an age by hand but be careful not to burn the plastic :wink:

Neil

aye he did i can remember that and when it was finished it looked as good as new to  :cool:

Title: Re: bora clocks help
Post by: bobreece on 14 October 2009, 14:02

carnt find it either guys

Title: Re: bora clocks help
Post by: chrisr103 on 14 October 2009, 17:42

Its half way down on page 4 of his build thread

http://uk-mkivs.net/forums/t/201437.aspx?PageIndex=4

Title: Re: bora clocks help
Post by: bobreece on 15 October 2009, 03:07

cheers m8 found it i tried some megs plasticX stuff its done pretty good but going to try the brasso as well