GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: Devilz on 12 October 2009, 16:26

Title: vagcom today
Post by: Devilz on 12 October 2009, 16:26
vagcom today on my mk4 and wooh, got these 7 faults,

VAG-COM Version: Release  311.2-N


Chassis Type: 1J - VW G/J/B Mk4
Scan: 01,02,03,08,15,17,19,22,35,46,56
 
Address 46     -------------------------------------------------------
   Controller: 1J0 959 799 AH
   Component: 4U Zentral-SG Komf. 0001
   Coding: 04096
   Shop #: WSC 00028
7 Faults Found:
01329 - Convenience System Data Bus in Emergency Mode
            35-10 - - - Intermittent
01331 - Door Control Module: Driver Side (J386)
            49-10 - No Communications - Intermittent
00928 - Locking Module for Central Locking: Front Driver Side (F220)
            54-10 - Incorrectly Equipped - Intermittent
00932 - Electric Window Motor: Drivers Side (V147)
            62-10 - No or Incorrect Adjustment - Intermittent
00943 - Heated Exterior Mirror: Driver Side (Z4)
            35-00 - -
01358 - Internal Central Locking Switch: Driver Side (E150)
            27-10 - Implausible Signal - Intermittent
00912 - Window Regulator Switch: Front Left (E40)
            27-10 - Implausible Signal - Intermittent

End   -------------------------------------------------------


this all happened after I replaced windows regulator kit, need help with these now!!
Title: Re: vagcom today
Post by: Rhyso on 12 October 2009, 16:28
did you disconnect the battery before replacing the regulator??

If not then you have no problems - just clear the codes and re-test!

In future before you do ANY work disconnect the battery first to avoid any fault codes being generated :afro:
Title: Re: vagcom today
Post by: Devilz on 12 October 2009, 16:35
Quote from: Rhyso on 12 October 2009, 16:28
did you disconnect the battery before replacing the regulator??

If not then you have no problems - just clear the codes and re-test!

In future before you do ANY work disconnect the battery first to avoid any fault codes being generated :afro:

no i didn't but i will remember this next time mate, sorry for being thick but how to clear codes?
Title: Re: vagcom today
Post by: Rhyso on 12 October 2009, 16:37
Quote from: devilz on 12 October 2009, 16:35
Quote from: Rhyso on 12 October 2009, 16:28
did you disconnect the battery before replacing the regulator??

If not then you have no problems - just clear the codes and re-test!

In future before you do ANY work disconnect the battery first to avoid any fault codes being generated :afro:

no i didn't but i will remember this next time mate, sorry for being thick but how to clear codes?

I presume you did an auto-scan??

you need to select the module (in this case 46 - Central Convenience), scan the module and then you click Clear DTC's

Title: Re: vagcom today
Post by: Devilz on 12 October 2009, 16:39
Quote from: Rhyso on 12 October 2009, 16:37
Quote from: devilz on 12 October 2009, 16:35
Quote from: Rhyso on 12 October 2009, 16:28
did you disconnect the battery before replacing the regulator??

If not then you have no problems - just clear the codes and re-test!

In future before you do ANY work disconnect the battery first to avoid any fault codes being generated :afro:

no i didn't but i will remember this next time mate, sorry for being thick but how to clear codes?


I presume you did an auto-scan??

you need to select the module (in this case 46 - Central Convenience), scan the module and then you click Clear DTC's



yes i did auto-scan, i will do module now, cheers
Title: Re: vagcom today
Post by: T_J_G on 12 October 2009, 16:43
Clear and rescan in a few days mate. No engine ones though:)