GolfGTIforum.co.uk

General => The garage => Topic started by: Phil_Gti-16v on 11 October 2009, 15:48

Title: ABF Conversion wiring.
Post by: Phil_Gti-16v on 11 October 2009, 15:48

Finishing off an ABF swap on a Raddo so is pretty much the same wiring f/box wise as a CE2 Mk2.

Have had a problem getting spark and have been told there is a red and yellow wire by the fusebox on the ABF loom which needs an ignition feed.

Has anyone else on here done this swap and can they tell me where they put this wire to in the fusebox for its ignition feed. Thanks.

Phil.S

Title: Re: ABF Conversion wiring.
Post by: oakgreengolf on 11 October 2009, 20:45

http://www.dannyp.info/

Title: Re: ABF Conversion wiring.
Post by: Phil_Gti-16v on 11 October 2009, 21:53

Cheers mate, I'll have a read through that. Thanks. :smiley: