GolfGTIforum.co.uk

General => The garage => Topic started by: Phil_Gti-16v on 10 October 2009, 17:34

Title: Wiring diagram needed for Mk3 Golf GTi
Post by: Phil_Gti-16v on 10 October 2009, 17:34

Hi guys need a wiring diagram for the engine loom of a Mk3 Golf Gti on a P plate.


Am finishing up an engine swap that someone else has started and just need to work out a few wires.

Any downloads anyone knows of.

Thanks in advance.

Title: Re: Wiring diagram needed for Mk3 Golf GTi
Post by: Phil_Gti-16v on 10 October 2009, 17:38

Forgot to add its for a 1996 2.0 16v Mk3 engine. :smiley:

Title: Re: Wiring diagram needed for Mk3 Golf GTi
Post by: popleyruss on 10 October 2009, 21:21

<a href="http://s27.photobucket.com/albums/c156/popleyruss/?action=view&current=KR_08_9.jpg" target="_blank"><img src="http://i27.photobucket.com/albums/c156/popleyruss/KR_08_9.jpg" border="0" alt="Photobucket"></a>(http://i27.photobucket.com/albums/c156/popleyruss/megasquirt20wiring_Small.jpg)(http://i27.photobucket.com/albums/c156/popleyruss/NEWdiagram1.png)

Title: Re: Wiring diagram needed for Mk3 Golf GTi
Post by: danny_p on 10 October 2009, 22:43

for MS your best off  routeing all the sensor grounds back to pin 19. 

dor digi 3  there is stuff on my website

Title: Re: Wiring diagram needed for Mk3 Golf GTi
Post by: rubjonny on 13 October 2009, 17:10

1st 2 links are for KR wiring, 2nd 2 are for megasquirt, not much use unless thats what you're running it on.

ABF ecu and vag-com
http://vwtech.no-ip.info/downloads/g3abfecu.pdf
http://vwtech.no-ip.info/downloads/g3vagcom.pdf

and factory immobilisor if it has one
http://vwtech.no-ip.info/downloads/g3immobilisor.pdf

Title: Re: Wiring diagram needed for Mk3 Golf GTi
Post by: Phil_Gti-16v on 13 October 2009, 18:01

Nice one thanks mate.