GolfGTIforum.co.uk
General => The garage => Topic started by: Manny007 on 21 September 2004, 17:58
-
Does anybody know where i can get a better manifold from to increase my 8valves torque figures?
and is there anything else that will make a huge difference for similar kinds of cost?
-
depends on what kind of money your talking. ive spent quite a bit on my 8v(which is in a mk1 gti) an im pushing just under 190bhp.
-
When you say torque do you actually mean that??
Normally the quest is for power (BHP) and along with that they'll be an increase in torque - but from what you've said you want more raw pulling power over pure BHP correct ???
If that's the case it's really not gonna be cheap - most mods are there to either increase air / fuel or get the car using higher revs to breathe better. Torque is completely different and usually comes from an increase in capacity - so from a say 1800cc to 2000cc, or as you say an increase in diameter in the inlet track; but this in turn pushes the power further up the rev range.
I could waffle on for ages - but bottom line is, is this what you're really after??