GolfGTIforum.co.uk
Model specific boards => Golf mk2 => Topic started by: 20vTom on 10 September 2009, 01:26
-
Basically what common bolt on parts can be fitted to a mk2 from newer models? Going to be buying a mk2 soon (hopefully the weekend as viewing 1) to be stripped down to bare metal restored + Resprayed and fitted with a 20v turb power factory. Im just weighing up my options in regards to :-
Interior eg mk4 leather recaros etc
Brakes eg tt 312mm disks
Suspension
Wheels.
This is not a dreamer post from a newbie, the engine is already sat at home along with the funds in the bank! Iv joined this forum to get the required information from time to time and will get my thread up when there is progress to speak of!
Cheers for any replies/help
Tom
-
hi if you use the search function most of your questions will be awnsered. mk4 seats wont go straight in, g60 brakes are your best bet as they that are not that hard to fit an if your stripping it you can put the bigger servo on a lot easier. suspension i would go for some good quality coilovers and polybushes. hope that helps
:wink: