GolfGTIforum.co.uk

General => Cosmetic and bodywork matters => Topic started by: hammerdrew on 05 September 2009, 19:43

Title: Before I make the big mistake...........
Post by: hammerdrew on 05 September 2009, 19:43

Homies... :wink:

Can I fit 4 stud BBS alloys to a "N" reg MK3???

Cheers in advance.... The auction ends tommorrow night so need to make sure there gunna be good to go!!

Title: Re: Before I make the big mistake...........
Post by: avengedslayer on 05 September 2009, 21:43

is it a non GTI? :smiley:

Title: Re: Before I make the big mistake...........
Post by: boneybradley on 05 September 2009, 22:11

mk3 non gti is 4x100 and gti is 5x100....make sure there not bmw fitment etc as they won't fit

Title: Re: Before I make the big mistake...........
Post by: hammerdrew on 06 September 2009, 10:58

Its a Gti  :grin:


   
Rim Width:  --   Tyre Width:  205   
Rim Diameter:  16 inches   Aspect Ratio:  45   
Offset:  45   Load Index:  83   
Number of Studs:  4   Speed Rating:  W: max 168 mph   
Stud Diameter:  --   Tyre Manufacturer:  Bridgestone 

They are off a polo I think?!

Title: Re: Before I make the big mistake...........
Post by: boneybradley on 06 September 2009, 13:48

thats a big NO then  :wink:

Title: Re: Before I make the big mistake...........
Post by: hammerdrew on 06 September 2009, 14:40

Ok... think he has just advertised them for a polo but they came off a 2001 golf cabriolet? Any luck????

Title: Re: Before I make the big mistake...........
Post by: hammerdrew on 06 September 2009, 15:37

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=320418895427&ssPageName=STRK:MEWAX:IT

Check em out.... No stealing now   :wink:

Title: Re: Before I make the big mistake...........
Post by: boneybradley on 06 September 2009, 16:12

well that's still a big no I'm afraid...the mk4 (also known as a mk3.5) cab was a 4x100

Title: Re: Before I make the big mistake...........
Post by: hammerdrew on 06 September 2009, 20:11

OK..No worries at least I know now huh!! lol

What would I be looking for then and what do you mean by 4x100 etc... so I dont balls this up  :tongue:??

Boney...Cheers for your help mate appreciate it!

Title: Re: Before I make the big mistake...........
Post by: hammerdrew on 08 September 2009, 10:03

Mods... lock and delete please  :wink: :wink:

Title: Re: Before I make the big mistake...........
Post by: Wayne on 09 September 2009, 13:10

Changing to 4 stud is not easy I have asked in the past.