GolfGTIforum.co.uk

General => Cosmetic and bodywork matters => Topic started by: damien010685 on 22 August 2009, 13:58

Title: Installing New Instrument panel
Post by: damien010685 on 22 August 2009, 13:58

Hi guys Looking to install a silver set of dials replacing black ones and change the leds i will have instructions to do the led bit but removing the dash to do this i havnt a clue does anyone have any knowledge of this or has done it and could shed some light plz

Title: Re: Installing New Instrument panel
Post by: JamesBaby on 09 September 2009, 14:35

Download these instruction available on the following website. They explain the gist of it well.

http://www.dubdesignindustries.com/catalog/download-ddi.php

Title: Re: Installing New Instrument panel
Post by: damien010685 on 09 September 2009, 18:45

Cheers for that have seen that before my guages are diff its vr6 dials with the Lcd bulbs embeded in the circuit board i believe i need to unsolder and resolder new ones as the sial faces is 1 complete unit not  4 individual dials like the shown but thank you all the same mate

Title: Re: Installing New Instrument panel
Post by: JamesBaby on 09 September 2009, 19:12

There is a thread reagrding those on here too,. With pics of the leds that need to be changed etc. Saw it last night.

Title: Re: Installing New Instrument panel
Post by: damien010685 on 10 September 2009, 11:32

Yes bud for the dials in both sets of photos it is not the same type as my dials those dials have 4 seperate dials Mine is 1 complete dial with all 4 on 1 lump of plastic the dials in the photos the leds unclip and are not soldered Mine are and require more work i have seen a video but cant remember where cheers for your help but the page doesnt help my situation thx