GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: Grand Master Patch on 13 August 2009, 21:44
-
Would it be ok to fit a ko3s turbo onto my AGU and run it on the ko3 map(custom code) for a few days?
The idea is to fit everything needed and drive down to R-tech a few days later to have the map etc....
-
Fairly sure you could. Or you could post the ECU to get some standard map on there as a temporary measure.
-
Posting ecu is not an option,my car is used daily.
-
I figure it'd either work, or go limp.
-
Ring RTech patch
-
It works fine, don't worry about it. I ran my AGU on a stage 1 revo with a k03s fitted for over 12 months before I got around to changing it.
-
I keep meaning to,but everyday i get side tracked with work
-
I almost got something right, YES!! :grin:
-
if you rang with that question the phone would most likely get handed to me anyway :tongue:
-
It works fine, don't worry about it. I ran my AGU on a stage 1 revo with a k03s fitted for over 12 months before I got around to changing it.
That's good to know,can stage2 be done by mobile mapping?
-
There is a stage 2 map available for an AGU/k03s combo that can be done mobile, but i reckon you'd benefit from some dyno time with your mods, as well as a thorough health check before-hand.
-
It works fine, don't worry about it. I ran my AGU on a stage 1 revo with a k03s fitted for over 12 months before I got around to changing it.
That's good to know,can stage2 be done by mobile mapping?
Hello Patch,
I like to do the AGU & KO3s on the rolling road, just so I can log the AFR across the whole band. A spec2 mobile remap would be fine for your car, but every conversion differs and I like to get them spot on every time. So if you come to us you will get rolling road time and a Fusion remap (semi custom map) carried out on the rolling road with our Innovate logging system. This method allows me to adjust the map to make the curve as smooth as I can be.
Your best option is use the £40 mobile remap cost and put it towards a fusion remap and rolling road time which I can do for £190 all inc to you.
Nick
-
Nice price that!!
-
Nice price that!!
So what you waiting for??? Get a KO3s on ya car m8!!! :grin:
The remap and ko3s totally transforms the AGU.
Plus pop down to me when you can can I want to find out where your missing GGs are.
Nick
-
You reckon 189bhp is a bit low?
-
That sounds like a plan,i'll get all my parts fitted and arrange a day to drive down to you,just sweet talking sarah at awesome for a cheap forge tip and i'll fit everything at once.Does that price still stand if it's on the wrong side of ed38?
-
Nick I wish I was closer to your workshop!! Will have to just settle for the basic K03s AGU map (when I fit the turbo) for now and let Ben see how it performs at JKM in Oct, then plan a weekend to run up to you and tweak in the new year
-
Nick is a Forge dealer Patch, so ask him for a price, normally their prices are really competetive!
-
Nick is a Forge dealer Patch, so ask him for a price, normally their prices are really competetive!
none in stock and a 3-4 week wait for forge to make them unfortunately
-
Nick is a Forge dealer Patch, so ask him for a price, normally their prices are really competetive!
none in stock and a 3-4 week wait for forge to make them unfortunately
Really!? lots of supply problems with Milltek and Forge at the moment aren't there!?
-
Nick is a Forge dealer Patch, so ask him for a price, normally their prices are really competetive!
none in stock and a 3-4 week wait for forge to ma :grin:ke them unfortunately
Really!? lots of supply problems with Milltek and Forge at the moment aren't there!?
I blame this forum - too many recommendations :grin:
-
they did mention while i was there that the 007p that gets recommended on the forums is their biggest selling product! it's a once piece-fits all for most vag applications.. might have to make my own and big them up on the forum :grin:
-
they did mention while i was there that the 007p that gets recommended on the forums is their biggest selling product! it's a once piece-fits all for most vag applications.. might have to make my own and big them up on the forum :grin:
It isn't hard to be an improvement when VW etc in their infinite wisdom decide to manufacture their cars with plastic ones!
-
im running a ko3s on a kos map. runs fine. all that will happen is it will run the same as the ko3 untill you get it mapped to the ko3s
-
Had a little think about my high clutch biting point,i'm a little worried that it will let go midway through the map on the rollers,so i've decided to fit the G60/VR6 combo before i come down.I hope to get this and the turbo fitted next weekend and i can get down to R-tech asap.Waiting for a group buy on the tip,but i might just see if i can get a std one and buy one from R-tech while i'm down there.
Nick-do you have any in stock? Black?
-
I have a standard K03s TIP if you want it mate, postage and it's yours
-
I have a standard K03s TIP if you want it mate, postage and it's yours
You are a star,where do i send the money?
-
let me get it on the scales and see what the damage is mate and we'll go from there :wink: