GolfGTIforum.co.uk

Model specific boards => Golf mk3 => Topic started by: faz186 on 25 July 2009, 23:37

Title: stub axel/ wheel bearing carrier
Post by: faz186 on 25 July 2009, 23:37

guys

my rear stub axel or bearing carrier has gone on my vr and was wondering if the vr part is the same as the 16v part,
my bearing went and it mashed the whole bearing carrier so i need a new 1,

so is the part the same as a 16v or do i need from a vr only

Title: Re: stub axel/ wheel bearing carrier
Post by: Wayne on 25 July 2009, 23:43

Should be the same.

Title: Re: stub axel/ wheel bearing carrier
Post by: faz186 on 25 July 2009, 23:50

how sure are you, i dont wanna buy 1 from a 16v and its wrong but some people say that most parts are the same

Title: Re: stub axel/ wheel bearing carrier
Post by: Wayne on 25 July 2009, 23:53

Quote from: faz186 on 25 July 2009, 23:50

how sure are you, i dont wanna buy 1 from a 16v and its wrong but some people say that most parts are the same

Well 8V / 16V and VR6 from memory had the plus susp. set up so should all be the same, I think the 4 stud one is different.

Title: Re: stub axel/ wheel bearing carrier
Post by: faz186 on 25 July 2009, 23:56

yeah i guess so, my car is in garage and i need it out lol, thanks for the advice, looking for a 16v or vr part now ive emailed a few peeps