GolfGTIforum.co.uk
Model specific boards => Golf mk3 => Topic started by: Diluxe on 20 July 2009, 12:10
-
bought some koni's (the yellow ones) off ebay,
are there any bit off my standard mk3 suspension i need to use? or better yet does anyone have a link or a diagram of what it shoudl look like all built up (front and rears)
I found a link on the koni website , but the downloadble pdf is in german
cheers
-
as long as you get pictars in the diagram then its a win...reading is for suckers :lol:
-
bought some koni's (the yellow ones) off ebay,
are there any bit off my standard mk3 suspension i need to use? or better yet does anyone have a link or a diagram of what it shoudl look like all built up (front and rears)
I found a link on the koni website , but the downloadble pdf is in german
cheers
LOL just phone aminder
cheers
us lot
-
dont really understan what you mean? do you have to build them yourself or something? the only bit you will probly need of the old suspension will be the brake line holder which is very easy to swap over
-
So easy to do, don't be scared just start undoing things :wink:
-
you will need the top mounts, top caps, bearing assy etc, all from your old suspension.
-
in fact, here you go, a diagram i made for someone else, heres how it should be set up.
hope it helps.
jon.
(http://i238.photobucket.com/albums/ff159/_redders_/Untitled-5.jpg)
-
found this also.
http://www.tigerstyle.co.uk/phpBB3/viewtopic.php?f=10&t=33186&p=252723&hilit=coilovers#p252723 (http://www.tigerstyle.co.uk/phpBB3/viewtopic.php?f=10&t=33186&p=252723&hilit=coilovers#p252723)
-
STICK to the maintence section?