GolfGTIforum.co.uk

Model specific boards => Golf mk3 => Topic started by: whit on 23 June 2009, 21:40

Title: ABS light on after disconnecting some wires near ignition????
Post by: whit on 23 June 2009, 21:40

after disconnecting a couple of connectors near the ignition the ABS light is now on all the time???

how can i get it to go off after starting like it did before i disconnecting these wires?

Title: Re: ABS light on after disconnecting some wires near ignition????
Post by: chilli_dub on 24 June 2009, 08:22

Firstly which wires have you disconnected near the ignition? Chances are youve loosened one of the ABS signal wires. Trace the ABS wires from the rear of the ABS light cover right back to the fuseboard, make sure there are no breaks etc.

Title: Re: ABS light on after disconnecting some wires near ignition????
Post by: eiprahs on 24 June 2009, 09:01

check fuse too in case you shorted a wire in the process

Title: Re: ABS light on after disconnecting some wires near ignition????
Post by: whit on 24 June 2009, 14:33

Quote from: chilli_dub on 24 June 2009, 08:22

Firstly which wires have you disconnected near the ignition? Chances are youve loosened one of the ABS signal wires. Trace the ABS wires from the rear of the ABS light cover right back to the fuseboard, make sure there are no breaks etc.

it seems to be the connector to the ignition switch that affects the ABS light

why would it now stay on all the time after disconnecting the ignition switch???

if it's a fuse any idea which one it is??

Title: Re: ABS light on after disconnecting some wires near ignition????
Post by: eiprahs on 24 June 2009, 14:35

abs fuse try