GolfGTIforum.co.uk
Model specific boards => Golf mk3 => Topic started by: samy_1800_turbo on 20 June 2009, 19:34
-
my mates vr6 keeps over heating he removed the thermostat completely it still did it and now hes replaced the head gasket n it keeps bubbling up the water. any advice i have not looked at this yet but will be soon so need so help. i herd the vr6 are a pain to bleed.
-
Failed water pump?
-
how do i check this. does this mean the rad want keep hot n no hot air in the heater as its not pumping water round
-
are you sure that there isnt an air leak and its been bled properly???
-
dont the vr's have 2 pumps?
-
dont the vr's have 2 pumps?
yep a electric one.
would look into that..
-
The electric pump only runs when the engine is switched off, to prevent hot spots in the engine.
-
so the eletric one should cause a problem then when the engines running
-
No, the electric pump only runs when you stop the engine.
Check the main pump.
-
how do i check if its working surly if the rads geting hot it n i get hot air i guess its working is this correct
-
Run the car from cold, take the expansion tank cap off, you should see water slowly coming back in the top.
-
ok cheers
-
are you sure that there isnt an air leak and its been bled properly???
:undecided: