GolfGTIforum.co.uk

Model specific boards => Golf mk2 => Topic started by: bazzza on 13 June 2009, 22:14

Title: breather on a 2liter
Post by: bazzza on 13 June 2009, 22:14

er i'v just got a 2liter mk3 bottom end an it has a oil breather on it next to the oil cooler  can i block it up ..??.is goin on my ev kjet enigne 8v !!

Title: Re: breather on a 2liter
Post by: Diamond Hell on 13 June 2009, 22:55

TSR do them, but make sure you're allowing the crank pressure out somewhere, or you'll start blowing seals, matron.

Title: Re: breather on a 2liter
Post by: deanpompey on 14 June 2009, 15:47

another way to do it is to extend the crank breather hose up to where the rocker breather is, and join them onto the GTI flying saucer with a t piece, then attach as normal to the inlet mani... much better if you ask me  :nerd:

Title: Re: breather on a 2liter
Post by: Wayne on 14 June 2009, 19:10

As above is the better way.

Title: Re: breather on a 2liter
Post by: VeeDubGTI16v on 14 June 2009, 19:25

or send them both to a catch tank/lucozade bottle

Title: Re: breather on a 2liter
Post by: bazzza on 14 June 2009, 21:00

thanks... all so is the warm up valve just bolted to the blocks ie there's not a hole behind it just a case of movin it, an as 4 the fly wheel do i use my mk2 one with a mk3 clutch or a mk2 clutch? plannin to put it in next week ???