GolfGTIforum.co.uk

Model specific boards => Golf mk1 => Topic started by: andc1 on 10 June 2009, 21:30

Title: will mk2 into a mk1
Post by: andc1 on 10 June 2009, 21:30

hi all, will any mk2 bits fit my mk1? i mean like interior, trim, i can get a mk2 3 door valver quite cheap and i have a mk1 valver so i no the engine will come in handy!

Title: Re: will mk2 into a mk1
Post by: rubjonny on 11 June 2009, 10:37

pretty much only the engine and wheels are any good! front seats go in but the forward/back sliders are on the wrong side so to move the seats you have to reach under and release the pin.

Title: Re: will mk2 into a mk1
Post by: andc1 on 11 June 2009, 14:39

what about rear seat? seat bellts and trim, i no i might have to cut the trim down abit but will it fit?

Title: Re: will mk2 into a mk1
Post by: rubjonny on 11 June 2009, 14:55

seat will need mods, belts might fit but mk2 belt clips are a different style to mk1 if its an early one so you';ll need to make sure you swap everything over.

Title: Re: will mk2 into a mk1
Post by: andc1 on 12 June 2009, 20:41

when u say the rear seats need mods? just the fittings on it? what about all the plastic trim, bit of trimmng and it wll fit wont it????!!!!! :laugh: :laugh: :laugh: :wink: :wink: :wink:

Title: Re: will mk2 into a mk1
Post by: rubjonny on 15 June 2009, 08:39

it'll take a lot more than 'a bit of trimming' the frame work of the car is a totally different shape. the benches can be made to fit apparently, iirc the mk2 bench is actually a little narrower than a MK1?  if you have the bits, try it ;)

Title: Re: will mk2 into a mk1
Post by: Tramp on 17 June 2009, 19:06

I tried to put some MK2 seats into a MK1 and It just don't work. The rails are set up different and to modify them is easier said than done.
.

The engine can be fitted but the Manifold faces a different way but that can be compensated for.