GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: gaz_marshall on 27 May 2009, 15:26

Title: Bit of a problem...
Post by: gaz_marshall on 27 May 2009, 15:26

I've just fitted my new dump valve and seem to have pulled out some wires quite close to one of the hoses. The wires were attached to some sort of plug and I can't find a way to reconnect them. I just wondered if its ok to drive like this to a garage or whether I'd be silly to even turn the engine on.

I have pictures but not sure how to upload them.

Cheers

Gareth

Title: Re: Bit of a problem...
Post by: Rhyso on 27 May 2009, 15:30

www.photobucket.com and upload

then copy and paste the 4th line under the pic into the thread

by the sounds of it you've pulled the wires out to your boost control soleniods - i wouldn't drive it if i were you

Title: Re: Bit of a problem...
Post by: gaz_marshall on 27 May 2009, 15:48

thanks rhyso

(http://i648.photobucket.com/albums/uu203/gaz_marshall/2009_0527gti0001.jpg)

(http://i648.photobucket.com/albums/uu203/gaz_marshall/2009_0527gti0002.jpg)

Title: Re: Bit of a problem...
Post by: gaz_marshall on 27 May 2009, 16:51

are these the wires to the boost control soleniods? if so what can i do? if i cannot drive it is there a way to repair it myself- i can't really see where the wire disappears into at the other end, eek!

any help much appreciated

Title: Re: Bit of a problem...
Post by: Rhyso on 27 May 2009, 16:55

to me that looks like your N75 valve which controls your turbo

i'm sure the petrol boys will be along to confirm

Title: Re: Bit of a problem...
Post by: gaz_marshall on 27 May 2009, 19:48

I've had a quick look at the part no 037906240 and reckon i need a new connector, something like this?

http://www.atlanticz.ca/zclub/techtips/injectors/connectors/index.html

I could be completely wrong but it just looks like a standard connector although the one I've taken off is a sealed unit and so impossible to rewire. Could just be a case of buying a new connector and wiring it up??