GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: jonesltd on 25 May 2009, 15:15
-
Would it look stupid if I just had an R32 front bumper on the front and poss side skirts but left the back bumper normal 2002 TDI one and lowered it with baby 17 rs6's?
-
Wouldn't look too bad if you were low enough.
-
yes
-
R32 kit need to be complete to make it work IMO
-
u cant have an r32 rear bumper i have seen one it looks gash! just do front and side skirts! it will be ok as u are lowering it!
-
u cant have an r32 rear bumper i have seen one it looks gash! just do front and side skirts! it will be ok as u are lowering it!
I know but at the mo I cant afford the r line r32 rear bumper, hence I thought just front and side skirts and lowered?
-
I don't like the R32 bumper on anything but a R32. However the R-Line bumper...
-
u cant have an r32 rear bumper i have seen one it looks gash! just do front and side skirts! it will be ok as u are lowering it!
I know but at the mo I cant afford the r line r32 rear bumper, hence I thought just front and side skirts and lowered?
well either save up and do it properly or don't do it at all and save for a decent car instead.
-
u cant have an r32 rear bumper i have seen one it looks gash! just do front and side skirts! it will be ok as u are lowering it!
I know but at the mo I cant afford the r line r32 rear bumper, hence I thought just front and side skirts and lowered?
well either save up and do it properly or don't do it at all and save for a decent car instead.
whats wrong with a TDi?
-
whats wrong with a TDi?
f**king loads
-
whats wrong with a TDi?
Ignore sharpie, he is a bellend.
-
whats wrong with a TDi?
f**king loads
better than the heap of sh!te you're running around in
-
Rather know a bellend than be one sharpie!
-
if you're going to keep the OEM rear, then you'll really need to get the rear valance colour coded too IMO
-
if you're going to keep the OEM rear, then you'll really need to get the rear valance colour coded too IMO
guessing ebay by putting in mk4 rear valance?
-
if you're going to keep the OEM rear, then you'll really need to get the rear valance colour coded too IMO
+1 :cool:
-
if you're going to keep the OEM rear, then you'll really need to get the rear valance colour coded too IMO
+1 :cool:
when I put that in I just get what I already got on my TDi - standard one or I get this http://cgi.ebay.co.uk/VW-GOLF-MK4-REAR-BUMPER-VALANCE-RGM-RV172_W0QQitemZ260305268664QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item3c9b672fb8&_trksid=p3286.c0.m14&_trkparms=72%3A1683|66%3A2|65%3A12|39%3A1|240%3A1318|301%3A1|293%3A1|294%3A50
-
i think it would look silly an unbalanced
-
i think it would look silly an unbalanced
So dont got for a anni valance, just get the full r32 kit if i do any bodykitting to the car?
-
umm i dont think you should get r32 or anni imo
i mean im not a fan of makin it look like something its not! an will be obvious if yours is diesel :)
-
umm i dont think you should get r32 or anni imo
i mean im not a fan of makin it look like something its not! an will be obvious if yours is diesel :)
Yes this is true and I do own a diesel...any ideas then as to what to do? :sad:
-
remap instead
-
remap instead
in process already....just want body kit or something to make it look nicer than it does, got it lowered...
-
if you're going to keep the OEM rear, then you'll really need to get the rear valance colour coded too IMO
guessing ebay by putting in mk4 rear valance?
the rear valance is the same on all MK4s apart from the anniversary, V6 and R32
the only issue you'll have is that the standard valance wont sit as low as the lines of the skirts, but it's not that much of a difference to cause an issue.