GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: THiNK on 22 May 2009, 19:29
-
Hi - Are there any guides on how to do this please?
Bear in mind I haven't used VAGCOM other than to clear errors :)
Cheers,
CS
-
look on www.ross-tech.com
takes longer to boot up the computer than to do do the changes
-
Here you go
Selective Unlocking:
[Select]
[46 - Cent. Conv.] (35 - Cent. Locking for manual window cars)
[Recode - 07]
Write down the existing coding for future reference.
Enter 5-digit code from below
[Do It!]
Look at the existing Soft. Coding. If you have selective unlocking (press the unlock button on the remote once to open the driver's door, twice to open all the doors) the last digit of your coding should be an even number. To make all doors unlock, add 1 to the coding.
So, if you have a 2-door 2002 GTI that is coded for selective unlocking (00064) add one to make it 00065 so that all doors unlock with one press of the unlock button.
Lock/Unlock Horn/Flash:
[Select]
[46 - Cent. Conv.] (35 - Cent. Locking for manual window cars)
[Adaptation - 10]
Channel (03..08)
Adaptation Value (1 = on, 0 = off)
[Save]
Channel 03 Auto Lock
Channel 04 Auto Unlock
Channel 05 Unlock, horn sounds
Channel 06 Lock, horn sounds
Channel 07 Unlock, turn signals flash
Channel 08 Lock, turn signals flash
-
^^^^^^^^^^
bah you made it too easy for him :tongue:
-
OHHHH !!! Rhyso is turning into a right b!tch :shocked:
-
OHHHH !!! Rhyso is turning into a right b!tch :shocked:
yeah bring it on :tongue: and add me to MSN too you miserable git :laugh: :laugh:
-
And me!!! :smiley:
-
I like easy :wink:
And seeing what someone else says always makes it easy :smiley: Its what you are here for :wink:
CS
-
Hey,
I'm guessing at the below :
Channel 03 Auto Lock - This is the thing that locks the doors at 10mph isn't it?
Channel 04 Auto Unlock - Whats this?
Thanks,
CS
-
Hey,
I'm guessing at the below :
Channel 03 Auto Lock - This is the thing that locks the doors at 10mph isn't it?
Channel 04 Auto Unlock - Whats this?
Thanks,
CS
when you remove your key from the ignition it will unlock the doors otherwisde two pulls on the handle or hit the button on the door
-
when you remove your key from the ignition it will unlock the doors otherwisde two pulls on the handle or hit the button on the door
Perfect - i'll turn that on too :)
Hope these changes go smoothly :P
CS
-
let me know how it goes
-
stupid question, can this be done on freeware?... :tongue:
-
Added both of you and neither have accepted yet :rolleyes:
-
stupid question, can this be done on freeware?... :tongue:
afraid not you need to have the full version of vag-com to enable this or know someone like i did :wink:
-
stupid question, can this be done on freeware?... :tongue:
afraid not you need to have the full version of vag-com to enable this or know someone like i did :wink:
a right, :wink: :wink: whats the rain like where you are?.
-
stupid question, can this be done on freeware?... :tongue:
afraid not you need to have the full version of vag-com to enable this or know someone like i did :wink:
a right, :wink: :wink: whats the rain like where you are?.
no prob :wink: and its decent here suns out :smiley: detailing weather :rolleyes:
-
i just managed to make my vag com get into the the recode section :smiley:
-
i just managed to make my vag com get into the the recode section :smiley:
which re-code section?
-
i just managed to make my vag com get into the the recode section :smiley:
which re-code section?
[Select]
[46 - Cent. Conv.] (35 - Cent. Locking for manual window cars)
[Recode - 07]
Write down the existing coding for future reference.
Enter 5-digit code from below
[Do It!]
-
i just managed to make my vag com get into the the recode section :smiley:
which re-code section?
[Select]
[46 - Cent. Conv.] (35 - Cent. Locking for manual window cars)
[Recode - 07]
Write down the existing coding for future reference.
Enter 5-digit code from below
[Do It!]
iirc thats for one touch un-locking :wink: i enabled that one i think with the shareware version this is the only one you can re-code and when you scan it it will tell you module is incorrectly coded i just ignore that
-
just one question though, what is the 5 digit code he mentions?..
should it be the exact same number as he mentioned or just add one to the one you have?.
-
right, that was a good guide, i know ross-tech have a tutorial but i think its a bit too in depth..
why dont we have a sticky here where we can just add the easy and cool stuff we can do?
i just did my one touch unlocking from this guide which i think is much, much better. as soon as get a full/registered version of vag com i will be doing quite a bit.. it shall be fun :smiley: